We've got a board that originally had an XMC4400. We compiled and built code for it using IAR Embedded Workbench and everything was hunky dory. We replaced the XMC4400 with a 4500 and rebuilt the code telling the IAR compiler that the target was now a 4500. The resulting binary doesn't run.
Our next step is to add a connector to the board for a J-TAG, but I wanted to check first with this forum and see if there's something that needs to change other than just changing the target to "XMC4500" in the IAR tools.
Our next step is to add a connector to the board for a J-TAG, but I wanted to check first with this forum and see if there's something that needs to change other than just changing the target to "XMC4500" in the IAR tools.