TC1797 UDE-DAS Problem

Hi everyone,

I'm new in Infineon and this forum. I started to work on TC1797 Tricore with DAVE 2. I watched a video related with starting coding with DAVE in here; http://www.edge-cdn.net/index.php?ct...502&setlang=en

I did all steps in the video but in UDE section, my compile process failed and I met this error ;

WARNING: Controller0.Core::UDEMemtool: FLASH programming for device '2 MByte OnChip Program FLASH (Demo)' not available !
ERROR: Controller0.Core::PFLASH1: Initializing FLASH driver on target failed
WARNING: Controller0.Core::UDEMemtool: FLASH programming for device '2 MByte OnChip Program FLASH (2) (Demo)' not available !
ERROR: Controller0.Core::FLASH: Initializing FLASH driver on target failed
WARNING: Controller0.Core::UDEMemtool: FLASH programming for device '64 KByte OnChip Data FLASH (Demo)' not available !
MSG: Controller0.Core::UDEDebugServer: Connection to TC1797 target monitor established: TriCore (Core), ID: 1015A083h
WARNING: Controller0.Core::UDEDebugServer: CRC check after download failed in memory range from 81000000H to 81004EEFH!
WARNING: Controller0.Core::UDEDebugServer: CRC check after download failed in memory range from 81004EF0H to 81004F0FH!
MSG: Controller0.Core::UDEDebugServer: Program with ID 0x1 - code size 20240 bytes - was loaded!

I don't know should I use JTAG or DAP? I set up DAS and Memtool only but I can't establish connection between PC and board like in the video so I cant't change flash memory and I can't do blinky. Should I set up another program from CD which is in the kit? Thank you for your advice.