Hi,
I'm trying to use a TLE 6244x to turn on a 12V DC motor. I've got !ABE and !RST wired directly to +5V, and have code in place to set both the corresponding MUX and SCON registers to 0 for all values, which should turn the motor on.
However, it doesn't, and there's no continuity between any of the output pins and ground. My STATCON register reads as normal, so there doesn't seem to be any problems there, and using the SPI read commands I'm able to read the SCON and MUX registers as well and confirm that they're set correctly.
Is there anything I'm potentially missing?
I'm trying to use a TLE 6244x to turn on a 12V DC motor. I've got !ABE and !RST wired directly to +5V, and have code in place to set both the corresponding MUX and SCON registers to 0 for all values, which should turn the motor on.
However, it doesn't, and there's no continuity between any of the output pins and ground. My STATCON register reads as normal, so there doesn't seem to be any problems there, and using the SPI read commands I'm able to read the SCON and MUX registers as well and confirm that they're set correctly.
Is there anything I'm potentially missing?