Hallo ,
to controle a dual active bridge, i need 8 PWM signals , as you can see in the picture below,every two MOSFET blong to a group from A to D. HSX (high side) and LSX (low side)
need a dead time between the transitions, plus the secondary bridge ( C and D) need to be phase shifted. I'm wondering if mixing CCU80 and CCU81
(A -----> CCU80.out20/CCU80.out21, B -----> CCU81.out00/CCU81.out01, C -----> CCU80.out30/CCU80.out31 and D -----> CCU81.out20/CCU81.out21)
will create a communication problems and Deficiency in generating the PWM signals.
Best regards,
Fethi
Attachment 3491
to controle a dual active bridge, i need 8 PWM signals , as you can see in the picture below,every two MOSFET blong to a group from A to D. HSX (high side) and LSX (low side)
need a dead time between the transitions, plus the secondary bridge ( C and D) need to be phase shifted. I'm wondering if mixing CCU80 and CCU81
(A -----> CCU80.out20/CCU80.out21, B -----> CCU81.out00/CCU81.out01, C -----> CCU80.out30/CCU80.out31 and D -----> CCU81.out20/CCU81.out21)
will create a communication problems and Deficiency in generating the PWM signals.
Best regards,
Fethi
Attachment 3491