Hello,
I'am using the xmc4200 Hexagon Board and i have a little problem with one
example project.
It is the HRPWM example with CSG event which start/stops the CCU8 pwm
generation. The problem is that I can't see any pwm output at Pin 64 (P0.5).
Only when clamping the output of the comparator manually with hrpwm->CSGSETG |= 0x04;
the start event is generated and pwm output starts.
According the information in the readme.txt I've connected the Pin 50
(P14.8 DAC out, which seems to work) with Pin 20 (P1.0 HRPWM0.COINA).
Now I am wondering if I do something wrong or if there is something wrong with
with my Hardware or maybe with the example project?
Much thanks in advance
I'am using the xmc4200 Hexagon Board and i have a little problem with one
example project.
It is the HRPWM example with CSG event which start/stops the CCU8 pwm
generation. The problem is that I can't see any pwm output at Pin 64 (P0.5).
Only when clamping the output of the comparator manually with hrpwm->CSGSETG |= 0x04;
the start event is generated and pwm output starts.
According the information in the readme.txt I've connected the Pin 50
(P14.8 DAC out, which seems to work) with Pin 20 (P1.0 HRPWM0.COINA).
Now I am wondering if I do something wrong or if there is something wrong with
with my Hardware or maybe with the example project?
Much thanks in advance