Lnk_mis ?
Hi, Has anyone experienced TwinCAT3 online state, flicking between reported OP and OP LNK_MIS A ? We see this with our XMC43 based boards, but not with the Relax XMC43/48 boards, they show steady OP...
View ArticleClik here to view.
XMC4800 EtherCAT high speed sync event
Hi Mophong, I've just reviewed the behaviour and did not find any issue. So first i have addad a DIGITAL_IO output APP and assigned pin 2.14 to this APP on the XMC4300 Relax Kit. This pin I toggle...
View ArticleSPI Driver Issue (SSC Module)
How can we proceed with the NDA? Yes, it way under it's maximum frequency, according to User's manual it would be capable of handling bauds up to 55 Mbps, however we're having problems at 5 Mbps.
View ArticleTC1782 SSC1 can not receive data
I have a demo project using ssc0 to exchange data with eeprom , the function of this demo is totally meat the requirements ! When i change the channal to ssc1 with the same cirtuit . the same eeprom...
View ArticleClik here to view.
How to implement 32bit free running hardware timer with XMC
Hi, Find attached an example using CCU4x timer slices. Regards, Jesus ????? CCU4_TIMER_CONCATENATION.zip (5.1 KB)
View ArticlePWM frequency of 1.5 Hz with DAVE APP
Done:) I modified the PWM function to work with float.
View ArticleXmc4800 - ieee1588
Hello Jesus, Thanks for the updated driver. It works better but I still have issues. First, in the code that is provided, the XMC_ETH_MAC_InitPTP() and XMC_ETH_MAC_InitPTPEx() will work well depending...
View ArticleEtherCAT - multiple profiles?
Hi, Does anyone know, with EtherCAT, whether there is such a concept, of different profiles ? In other words, allowing TwinCAT3 to chose different sets of data, to read and write ? The DAVE example...
View ArticleClik here to view.
VADC output graph looks weird in XMC4500
Hi, I have generated a project to obtain high sampling rate of VADC using XMC4500-F100x1024 Relax Lite Kit. But the output graph I generated seems like the sampling is not good enough..Can anybody tell...
View ArticleP7 800 and 700V used for flyback topologies
Can P7 800 and 700V are promoted for flyback topologies, can I use it in a PFC stage?
View ArticleCan't connect to VD_4_CH_CCM_BUCK_LED_01 (XMC1400 CCM LED Driver Demo)
Solved the problem myself. The chip had the wrong BMI. By using BMI get set function in DAVE I was able to put it in user mode. Fine now.
View Articlesoft switching application
What are the most important parameters making a MOSFET suitable for soft switching applications?
View ArticleWhich are the losses in a MOSFET when used in PFC?
Which are the losses in a MOSFET when used in PFC topologies?
View ArticleAurix free tool kit and aurix softeware frame work
Dear Sir How to use Tricore application code for Softeware frame work at aurix free toolkit environment ?
View ArticleWhat's the purpose of EEPROM from IRMCS0199-1-M1 board?
Thanks for your reply. However it doesn't answer my question. My question is how to use this EEPROM to store parameters and later how to ask IRMCK099M to use parameters stored in this EEPROM instead of...
View ArticleXMC 4200 CAN Bit Timing
Ok I think we figured out the problem: The communication works without errors when we use the following config: XMC_CAN_NODE_NOMINAL_BIT_TIME_CONFIG_t CanBaud_cfg = { .can_frequency = CAN_FREQUENCY_80,...
View ArticleUsing the XMC4700 relax kit to program any XMC microcontroller
Hello, Why don't you use Infineon's KIT_XMC_LINK_SEGGER_V1 ? This is the same hardware as the on board debugger of the relax kit. Ok, it is around 90 USD, which is more than the relax kit, but it is...
View ArticleChanging the gate turn on and off resistor to reduce the switching losses
By how much I can change the gate turn on and off resistor to reduce the switching losses in my MOSFET and increase the efficiency of the PFC converter?
View ArticleApril 21, 2017: New Release of DAVE APPs, XMC Lib and other Libraries
Today, we released an update of DAVE™ APPs, Device Description libraries, Device Pack and XMC Lib (included in Device Pack). DAVE APPs We released an update of 26 DAVE APPs to fix issues or limitations...
View ArticleApril 21, 2017: New Release of DAVE APPs, XMC Lib and other Libraries
Today, we released an update of DAVE™ APPs, Device Description libraries, Device Pack and XMC Lib (included in Device Pack). DAVE APPs We released an update of 26 DAVE APPs to fix issues or limitations...
View Article