Address/Data bus implementation?
Has anyone implemented an address/data bus with the XMC1400? I am looking to replace an old 8051 with 8 bit data, 16bit address, WR/RD, PSEN, ALE lines.
View ArticleI would like to buy some POWER MOSFET
You can select an online distributor in China on this Infineon page https://www.infineon.com/cms/cn/product/where-to-buy/ .
View ArticleC512 (SAB-C512) datasheet
Hello, I looking for SAB C512 datasheet, especialy SAB-C512A-02R8N. Can someone please help me, please? Very thanks
View ArticleI2C allcall address for I2C_SLAVE App
That's not possible using I2C protocol. You can use some multiplexers then you will be able to do it, but I think you should consider using another protocol. BR, Leonardo.
View ArticleProblem with Hex File Upload (XMC1200, Dave4)
Thank you Jesus for your answer, I import the project with the import dialog into the Dave-Worspace and usualy it works well. But sometimes when I would like to flash my controllers there is an error...
View ArticleC512 (SAB-C512) datasheet
Hello, I looking for SAB C512 datasheet, especialy SAB-C512A-02R8N. Can someone please help me, please? Very thanks
View ArticleDoes XMC Library for Embedded Coder support SPI communication?
Hi everyone, my project requires SPI communication between the XMC4700 board and other SPI slave devices. Since I'm trýing to use Simulink to establish the control algorithm, I wonder if there are SPI...
View ArticleNeed ADC drivers for AURIX TC275
Hi Please share ADC drivers for AURIX TC275 and application note on TC275 Best regards vijay
View ArticleCan EtherCAT application under any condition be updated?
Hi, The example ETHCAT_FWUPDATE_SSC_APPLICATION_XMC48 on the XMC4800_Relax_Kit seems to work fine. But my target application will be completely potted, so that only the power lines and the EtherCAT...
View ArticleXMC2Go XMC1100 Need to re-upload firmware when unplugged
Hello guys, When I started to program the XMC2Go XMC1100 board, it wasn't necessary to upload the firmware when the board was unplugged and plugged again. Last days, when I disconnect the board it...
View Articlexmc1300 and ccu4
Hi Xabi, sure it is. And I guess there are multiple of ways and I will suggest one of them. You can use CCU4_SLICE_CONFIG APPs and use two instances (CCU4_SLICE_CONFIG_0 & CCU4_SLICE_CONFIG_1) and...
View ArticleC512 (SAB-C512) datasheet
Hello, I looking for SAB C512 datasheet, especialy SAB-C512A-02R8N. Can someone please help me, please? Very thanks
View ArticleClik here to view.
CAN conflict
And unfortunately it doesn't I am seeing activity on the CAN receive pin, P14.3. I know that because I have added some temporary code to our main.c loop, to copy state of P14.3, to an LED. Loop...
View ArticleClik here to view.
DMA on XMC43 ?
Hi David, See attached project. Regards, Jesus ????? DMA_MEMCPY_XMC43.zip (1.88 MB)
View ArticleTLE987x(Eval Kit) reset problem when UART added
Dear all, I am having a device reset problem (maybe Watchdog timer) when I add UART transmit code to my program. I have the following doubts... 1. I am sending a number Send_Info(1245); by Timer21...
View ArticleEthercat back-to back MII connection, no PHY.
Hi Alberto, It should be possible. Are you using TwinCAT as EtherCAT master? Does it recognize the first slave in the chain? Regards, Jesus
View Articlefopen in DAvE 4.3 (erno = 88) Socket operation on non-socket
Hi Alan, fopen will not work, it is a posix call which is not fully implemented in the c library (newlib). Newlib requires an external implementation of system call open (a stub), which it is not...
View Articlesprintf function results in garbage and exception
Hi, I am using XMC1300 series MCU for my application. There are two ISR corresponding to CCU8 and CCU4 and 1 for VADC. When I am using sprintf function to display string on lcd, it shows garbage and...
View ArticleProblems with FIFO/Gateway on XMCs 4400 Multican
I have the same problems on a XMC 1404. After a short bus failure the gateway doesn't work correct. My workaround was to use a standard message object instead of a TX-FIFO and it works fine without any...
View ArticleInfineon IFX9201SG Current Vs Temperature Characteristics
I am unable to find IFX9201SG Current Vs Temperature Characteristics (graphs). Please provide link if any.
View Article