Clik here to view.
Temperature Sensor of BGT24MTR11 -- wrong transfer function equation
Hi Jhon, we have double-checked the transfer function and it seems to be outdated. Please calibrate the sensor according to the attached pdf to get the accuracy given in the datasheet. ?????...
View ArticleClik here to view.
About I2C master receive
Hi, to stabilize communication at I2C-Bus, I have added a "SW-Watchdog" function which prevents from stucking in while-loop, using DAVE 4.3.2 Step 1: Add SYSTIMER_0 to your application, refer to...
View ArticleRead Analog data and Transmit via UART in H-Bridge 2 Go Kit
Hi Rinya, could you please give me more information about your issue (which version of the ADC_MEASUREMENT APP are you using for example) or even better can you send me your project so I can see all...
View ArticleXMC4800 Receive data via Ethernet
Hello everybody, I'm trying to receive data with the Ethernet-Interface and I'm searching for an example code becauce I don't really know which methods I should use. Does anyone know one? Because the...
View ArticleClik here to view.
Problem with flashing TLE9879 Eval Kit with onboard USB debugger
Hi, I created a project that initializes all modules of the TLE9879QXA40: Attachment 3315 The behavior should be like this, in the runtime debug window : before the TLE_Init(); Attachment 3316 after...
View ArticleChanging Buck APP parameters on the fly
Any Comments on the question above? Thanks, Abhishek Sabnis
View ArticleETH_LWIP slimdown
Hi Jesus, Finally I got to this on my todo list. I've done all as you say, and it has made a commensurate reduction in the memp and ETH_LWIP memory requirements. Thank you. UDP I already had disabled....
View ArticleGTM ARU configuration
Hi all, I´m trying to configure ATOM1_4 to receive an ARU event from ATOM0_7, but until now I haven´t got any success. I´ve tried to read the User Manual and TC2xx_GTM_Detail_ARU_V10 document. But...
View ArticleRecomended Compiler
What's recommended Compiler for infineon TC297 in terms of available guides, board support packages/drivers etc. Please Guide Thanks Regards Furqan
View ArticleClik here to view.
TLE9879 Eval Kit onboard ADC Pot Issue.
Hello, I am using TLE9879 Eval Kit V1.2. So i have connected VDDP to JP6 pin no 1(As described in the user manual). And i have confirmed with a scope that in Pin 2.4 the voltage veries from 0V to 5V as...
View ArticleClik here to view.
Using VADC_GROUP app gives error in VADC around 2048
Hi, Using the VADC_GROUP app in Dave 4.3.2, the XMC4800 ADC measurement gives an error in the area around 2048. (see attached image). Using the simple ADC_MEASUREMENT app or the ADC_MEASUREMENT_ADV...
View ArticleCAN Repeater / Retransmitter - handling Remote Frames
Hi frankvh2, have you maybe considered Gateway functionality for your purpose? Especially while this statement in the reference manual states something that suits your needs: Quote: The gateway...
View ArticleTLV493D returns NCK
Hi, I'm using a TLV493D with a power separated by FET from microcontroller power, like Slave #1 in figure 14 of I2C interface note (https://www.infineon.com/dgdl/Infine...530e81c9db058c) Sometimes my...
View ArticleAurix Asynchronous SPI with Infineon MCAL APIs
Hi Everybody, I tried to build-up a small SPI communication on a TC277 board. The synchronous communication is working fine, but I also have to implement the asynchronous type. I think I configured...
View ArticleClik here to view.
Cross Compiler for TriCore Controller
Quote: Originally Posted by SUBBU3881 Hello, Can any one help in getting Cross Compiler for Infineon TriCore Controller.? I am working on a project that uses AUTOSAR. I need to port Micro-Python onto...
View ArticleHow to erase a installed Read+Write Protection
Hi. I've problems to remove a installed global read an Sector wrrite protection. What is the correct sequence to remove the protection? If i install only a write protection (for example on S2) with:...
View ArticleHow to use the Trigger of the DSM App
Hi, I want to use the trigger in the DSM App to integrate over a few values to eliminate noise. When I activate that function, DAVE adds a Event_Detector and Event_Generator. How can I use a Timer App...
View ArticleHow to transmit data on XMC4200 development board via USB
Hi all, I am now using Dave 4.2.3 with 64Bit and Distance2Go development board based on the XMC4200. I try to use sample code from "Dave Help --> USBD_VCOM" to enable the USB port and send the data...
View ArticleTLE987x(Eval Kit) reset problem when UART added
Thank you, M.K. for sharing those valuable screenshots. Can you tell how to use UART2 interrupt? I will be very grateful to you if you could explain the watchdog because many times I face the problem...
View Article