Clik here to view.
XMC4700 problem with CAN when sending and receiving nearly at the same time
We use a XMC4700 Controller and have a CAN-communication problem, when sending a CAN-message and receiving one nearly at the same time. The sending CAN-message is recorded by the can-sniffer, but the...
View ArticleXMC4300_Relax_EtherCat_APP_Slave missing manual pinout
Hi together, I follow the guideline which is included in the project and on page 29 there is an picture when I open the Manual Pin Allocator for the ECAT_SSC_0 which show me the pin number port (i.e....
View ArticleHSSL/HSCT channel usage
Hi, I am implementing a aurix-fpga communication with the HSSL/HSCT link and after reading the documentation I would need a bit of clarification on the frame headers. - The HSCT link has data channels...
View ArticleMeasurement individual core usage on TC39xx
Hello all, I am wondering that is there any way to measure/capture individual core usage on uC TC39xx. One approach I found is calculate the percentage of time the CPU is not in idlle time ( OS...
View ArticleProduct Information
DEMOBOARD BTN8982TA: https://www.infineon.com/cms/en/prod...ard-btn8982ta/
View ArticleOlder Versions of the ETHCAT_SSC_XMC43 example
Hi forum, I imported the version 3.3.0 for my XMC4300 evaluation board and I can't set the "HW Signal Connection" (Error Message: Selected APP does not contain output signal") and all pins in the Pin...
View ArticleXMC1202 with ULINK2?
I'm not able to trace it via oscilloscope sorry.. Any other idea? this thing is really frustrating. Thanks
View ArticleTC233 , Memtool and UART
Hi Saulyss, check the UART VCOM ports of your board that is connected to PC via USB. The you will get the data in the serial Monitor. Or if you are transmitting any data for example "Hello World!" then...
View ArticleCache invalidation
Hello, I want to invalidate Program cache. i used the suggested instruction : // invalidate program cache PCON1.B.PCINV = 1; But that generates a Trap (Trap_instructionError) and the CPU enter into...
View ArticlePrimepack IGBT5 and .XT
One more Question regarding IGBT 5 and XT... Could you please elaborate on the advantages of IGBT5/.XT modules compared to modules with standard joining technology? Do you have any documentation about...
View ArticleEcono modules with internal shunts
Can somebody help on this: Where can I find Econo modules with internal shunts and what are the benefits ?
View ArticleTraction Applications
Can the PrimePACK module used in traction applications and is it possible to use the XHP 2 in non-traction application?
View ArticleEcono modules with thermal interface material ?
Hi, guys, do you know if there are any Econo modules available with pre applied thermal interface material ? Thanks in advance
View ArticleConnect crystal to XMC1100
Hello! Can a crystal be connected to an XMC1100Q024? And if yes, where? Is there a hardware manual available for those devices? Many thanks!
View ArticleClik here to view.
problem : start a motor with Mce Designer
Hi everyone, I use the Evaluation board Eval-M1-101T with the Eval-M1-05-65D to control the speed of a motor. I have a problem when I want to start the motor, it indicates me an error because of the DC...
View ArticleHW registers that can be written during bootloader and available at...
Hello Developers I am using Aurix TC27xx and I need to identify connected peripheral with a HW instance ID during bootloader mode . I am planning to read few ADC pins (P00.8, P00.9 , P00.10) and using...
View ArticleEnabling Semihosting for TriCore App
Hello, I want to do the same but I'm using the Lauterbach debugger instead of UDE. How can I do the same? Are there some similar files for Lauterbach?
View ArticleXMC4500. Transmit Flash->DMA->USB - impossible?
I am trying to transmit data from internal flash-memory (of XMC4500) to USB (device-mode). Data transmits to IN-endpoint. USB works in DMA mode. But this doesn't work: I immediately get an "AHB Error"...
View ArticleBLDC Arduino shield TLE9879
How can Set the Mode for OSC with Different Speed. I am able to set Mode Forward and Reverse but How can i Set the Mode OSC.
View Article