[BTN7030-1EPA] Software
DC-SHIELD_BTN7030 is an Arduino shield and hence there is an example Arduino software together with the User Guide available in the GitHub repository https://github.com/Infineon/BTN7030-...ld/tree/master
View ArticleXMC1100 Real Time Clock (RTC)
Reference Manual RTC, V3.2 - V1.3, 2016-08 page 11-16 and 11-17 "Days counter starts with value 0 for the first day of month." incorrect, should be writen as: Days counter starts with value 1 for the...
View Articlemanual PIN allocator not showing PIN !
I tried disable of Firewall and antivirus, It dint work.[Laptop used was 4GB RAM] But when i tried using a laptop with 8GB RAM , its working. Is there a dependency on RAM of the LAPTOP too?
View ArticleMemtool to read-write a XC161CJ microcontroller's flash?
Also need to connect “ Target presence detection. Connected to GND on target side. Pull-up and sensing on tool side”
View Articlethe problem of Distance2Go's UART about setting of the MSB/LSB
Dear, Vasanth. I try to change the register using the function as below. XMC_USIC_CH_SetShiftDirection(XMC_UART1_CH1, XMC_USIC_CH_SHIFT_DIRECTION_MSB_FIRST); But, the UART_TX setting didn't change as...
View ArticleClik here to view.
Blinky Example for TC375 not building out of the box
Attachment 5687 Hi, I am evaluating the TC375 and am trying to build the blinky example, Blinky_LED_1_KIT_TC375_LK, and am getting build errrors saying it cannot create SOMEDIR. I searched the entire...
View ArticleFlash and debug .hex file in Aurix Development Studio
Hi! I'm using a TC38x MCU and I have been searching for a solution to flash and debug an already existing .hex file in Aurix Development Studio. The MCU is connected to the PC via a MiniWiggler V3 DAP...
View ArticleETH_LWIP basic ping response
Hey, I am trying to implement the basic ping response example from the ETH_LWIP App with a XMC4800-F144x2048. Therefor, I try to implement the example (from the App Help --> Usage) with the ETH_LWIP...
View ArticleMemory Allocation problem
Hi, i am using Tasking Compiler V6,3 for the TC367 and i am trying to move my application to another memory location. I read the manuals how to control the tasking linker via lsl-script, but all...
View Articleupgrade apps - After updating my project i still have the old versions of the...
Hi , did someone updated his apps correctly ? I used Apps upgrade. It generated me a new project with a migration report. It seems to be done correctly. But if i check the APP properties I still have...
View ArticleXMC4500 sending values from ADC to USB
Hello everyone, I am trying to acquire a voltage with my XMC4500 Relax Kit and then transmit the value through USB. I am using the ADC_MEASUREMENT app activated every 1s by a TIMER app and it works...
View ArticleThe PingID for the Myinfineon account
I'm not 100% sure on this stuff, but I think you can enroll a new device here: https://desktop.pingone.eu/cd-502863108.infineon Or, try the support line: support@infineon.com
View ArticleClik here to view.
Automotive Secure Gateway Schematic
Quote: Originally Posted by UC_wrangler The User Manual for the board is here: https://www.infineon.com/dgdl/Infine...7812d17eda5fa9 Chapter 4 says: I'm checking to see how this NDA business actually...
View ArticlePosition2Go - C Communication library on Ubuntu
Hi everyone, I am working with the demo board Position2Go. I have successfully used the C Communication Library provided by Infineon on my Windows machine to stream the data from the board to my PC....
View ArticleDAVE 4 APP for RTX V2?
Is there any plan to add a DAVE 4 App for RTOS RTX V2? Or have I just not found it yet?
View Articlespi clock pause before the last word
I don't think there is a workaround, because of the way the TC2xx QSPI peripheral works. With CS_VIA_PERIPHERAL_ENGINE (i.e., QSPI internal handling of CS), to send 8 bytes, you have to send 7, set...
View ArticleThermal performance of drive booster IC 1EBN1001AE
Hi! For the booster IC, the datasheet currently has theta-jA and theta-jC values. Could you share psi-JT for junction to top of case? I need this to estimate worst-case jn. temperature based on our...
View ArticlePorting Ethernet Project with LwIP to TC377
Thanks a lot. Meanwhile I am able to get always a link to Rtl8211. But very often sending of first message (dhcp_discover) after reset is not really working. The function runs well, but no output of...
View ArticleClik here to view.
Ethernet - SWR bit of DMA_MODE is set to 1 after Eth driver is initialized.
Quote: Originally Posted by JensM Hi DangHo, please have a look at P11.5. There you have the GETH_GREFCLK (Gigabit Reference Clock input for RGMII (125 MHz high precission)). Regards, Jens Hi Jens,...
View Article[BTN8962TA] Rise and fall time with Spice / LTspice model
Hi, the spice model for BTN8962TA has here limitations and changes in the SR resistor will nit show changes in slew rate. We will improve the model in a next revision. BR Markus
View Article