Marking / stepping / Errata
Hello, I am using XMC1302-T038X0064 MCU. How can I find out which stepping I have. Marking only tells me 064A. Is there an errata for the AB stepping? The AA stepping still has a lot of bugs.
View ArticleXSpy and new Dave4
Hi Daryl, thanks for clarifying this topic! Is there something similar to xSPY that can be used instead? best regards zbyno
View ArticleFCE CRC generator questions
I wish to use the FCE module to generate a CRC16 checksum. I have looked for examples but have only found an old DAVE example that cannot be opened with DAVE4. I have looked at the code but it seems...
View Articlemotor paramters in bldc example
Hi, regarding the BLDCBCSL01_Example1, how do the values of the motorparamters (Phase Resistance, Phase Inductance...) configurable in the GUI influence the source code? I cannot see any influence. So...
View ArticleDAVE 4.1.4 and new supported XMC controllers
Hello Daryl Quote: Originally Posted by Daryl Neo ... To install the new device descriptions: .... thanks for your help. but I found the solution by my self on the same day. Now I have to work with the...
View ArticleSense2Go xmc4200 COM port not detected
I have the same problem. Did anyone solve it? In addition to windows 7 ,i have tried it on linux, windows 8.1, windows 10 .
View ArticleEmulated EEPROM for XMC4500
I am experimenting with XMC4500 Relax Lite Kit. I need to store calibration data in non volatile memory. Where can I find the EEPROM Emulation DAVE4 APP for XMC4500? Thanks
View ArticleSPI communication giving problems for higher baud rate.
Hi, I am working on XMC 4100. I have interfaced ST M95320 (SPI EEPROM) to XMC 4100 through SPI communication. I have certain doubts which need to be cleared. 1-> In ST M 95320 DataSheet it is...
View ArticleMust have! Infineon Newest Generation TVS Diodes in Chip Scale Package
Infineon newest generation ESD protection diodes. Chip scale package TVS for wireless, computing & consumer applications. Product Brief download
View ArticleAtomic access of data for XMC4500
For XMC4500, is read or write of uint32_t, uint6_t or uint8_t data atomic? how about struct of mixed data types, is the access atomic? Default linker file is used with exception that last part of flash...
View ArticleCCITT CRC-16 with 8 bit data
The problem is that the CRC kernel 3 does not use the CCITT CRC 16 polynomial. I need to enter the data byte (8 bit) wise and then read a 16 CRC.
View ArticlePOSIF : How to generate an event when the encoder moves past a defined...
Hi everyone, I am using a linear quadrature encoder and I need trigger an event when the position / count changes by a defined amount (for example a 0.5 mm increase in position). Is there a hardware...
View ArticleXMC1000/4000 TIP of the day: Filling up USIC TXFIFO based on Standard...
Each USIC module provides a 64-dataword FIFO buffer, that can be allocated to the channels of the same USIC module. If the data set to be transmitted is more than the available transmit FIFO (TXFIFO),...
View ArticleSemihosting
Hi, I join the group of people who would really appreciate a working semihosting for printing debug information. I tried several things out with DAVE 4.1.4 and a XMC4500 Relax Kit, but nothing worked:...
View ArticleFreeRTOS App compilation error
Hello, I included FreeRTOS app. It cannot be compiled, due to errors reported in port.c file. Some instructions give errors, i.e. "selected processor does not support Thumb mode `vstmdbeq...
View Article__libc_init_array code not linked
Hello, I am trying to port large project from dave 3 to new dave 4. I have end up with problem that program never reaches main because of usage fault. From startup code it tries to branch to label...
View ArticleADC_AI.004 workaround additional details
Hi, This issue had been fixed for the new AB steps.
View ArticleXMC retention memory in hiberante domain
Hi rum, These are documented in the XMC data sheets. Attachment 1869 Attached Images mem.JPG (104.0 KB)
View ArticleReal-Time Clock XMC4500
I got this error Attachment 1870 Attached Images Untitled.png (16.3 KB)
View Article