Old package code rule (semiconductor package)
I would like to have an old package code rule for discrete semidoconductor product by predecessor of Infineon, namely Siemens semiconductor. Please let me know where and how I can get a copy of the old...
View ArticleXMC4400 Spurious SPI Interrupts?
Upon request, the finish_transfer function. Code: static void spi_finish_transfer(spi_interface_t* spif) { Â Â spi_transfer_t* _transfer; Â Â tbuf_push(51); Â Â XMC_GPIO_SetOutputHigh(...
View ArticleProblem with PMSMFOCSL01 control (program generated in DAVE3) on XMC1300
Hello stefannn, Have you checked if the "Transition Speed" from V/f to FOC is 100 rpm? Otherwise maybe the Offset or increasing voltage of V/f is too low. Another Option is that the FOC target at...
View ArticleEmulated EEPROM
I haven't tried EEPROM on XMC4 yet. But latest Flasher works fine & saves EEPROM contents.
View ArticleRGB LED Lighting Shield with XMC1202 - XMC source code
Hello, I have one question regarding the shield: Does anyone know why it is not possible to set WALKTIME lower than 15? This code: I2CWRITE2BYTES (ADDRESS, WALKTIME, 25); works fine, while this code:...
View ArticleAdvice set up a continuous repeating PWM signal different freq/duty over 2...
Hello. I have a PWM working with a set frequency and duty cycle using CCU4, slice 0. I have functions that set the duty cycle and frequency of the slice. But I am driving an external speaker alarm and...
View ArticleXMC4500: how to force CCU slices to their passive levels?
Hi, I am working on a motor control application where I am using one of the CCU8 units in the XMC4500 as follows: - Slice 0-2: complementary PWM outputs - Slice 3: ADC and interrupt (field-oriented...
View ArticleChanging walktime in XMC1202 on the Arduino shield to low values
Hello, I have one question regarding the Infineon Arduino Shield shield with an XMC1202, KITLEDXMC1202AS01TOBO1 Does anyone know why it is not possible to set WALKTIME lower than 15? This code:...
View ArticleRequest for schematic and/or other info about KIT_AURIX_TC297_TFT
Hello, I've currently big difficulty to login to the old myinfineon site. The newer site is not ready yet ; I really cannot find the information I'm looking for. Already a list of board pin-out would...
View ArticleFAQ for XMC4800 EtherCAT
Hi, do I have to use both EtherCAT-Ports (i.E. do i have to map all the signals to pins in the pin mapping perspective in DAVE)? I only need one EtherCAT Port as the network topology will be a star...
View ArticleClik here to view.
Send an SPI Sequence inside an interrupt in XMC4700
Hello, I would like to send an SPI sequence to an another board in different time Intervalls. To do that I'm using Dave 4.3.2, the Timer APP and the Interrupt APP. I connected the time event to the...
View ArticleDAVE with XMC creating a library project
Lackluster response rate here. I thought this was an easy one. Working with a local FAE, and digging through a weirdly layed out website, I found the link to the library zip file here:...
View ArticleImplementing FMCW on XMC4400 microcontroller
Hi all, Infineon is working on a FMCW SW for the BGT24RFB2412 with high priority. Currently there is only Doppler SW available. So, please stay tuned. As soon as development is done the SW will be...
View ArticleRaspberry PI XMC1000 compiler
Is there a compiler for XMC1000 that can work on the Raspberry PI? Thanks.
View ArticleRaspberry PI XC800 compiler
Is there a compiler for XC800 that can work on the Raspberry PI? Thanks.
View ArticleCCU80_CC81 Event 1 is detected erroneously when calling XMC_CCU8_EnableClock( )
Hi all, Have any of you come across the following problem? I am setting up the external stop functionality on a timer slice CCU80_CC81 on XMC4400 evaluation board. The input event is connected to a...
View ArticleTLF35584 - SPI Write to Protected Registers
I have SPI communication to this SBC working. I write these data to the SBC: Unlock: 0x8756 0x87DE 0x86AD 0x8625 Disable watchdog and error pin: 0x8D27 0x8A01 Lock: 0x87BE 0x8668 0x877D 0x8795 After...
View ArticleClik here to view.
BSDL-files for XC2000
Can you help me with BSDL-model for my board? The infrastructure test is always failed. On this screen you can see it. The D4 is SAK-XC2287M-104F80L. What you can say about it? Attachment 2705 ?????...
View ArticleDMA problem using two timers
HI Jesus, can you please give me some further support on that topic? Kind regards Sandro
View ArticleLow pass filter input counter ccu4
Hi, is it possible to add a low pass filter to the input pin when you use a ccu4 with external count function? Thanks Filippo
View Article