Migration from XMC4500 to XMC4700

Hi Jesus

Here an short update from our side

1. On our Testproject we do net see any DMA Errors when the Trap Occurs

2. We have produced 50 new PCB with the XMC4500 and they all work fine.
We have 20 PCBs with the XMC4700 which all show this trap problem.
Except the Microcontroller ther are all components the same on these PCBs.
They are even most from the same tray/package unit.

Even it is a satisfying workaround for us to use the XMC4500 we would be very interested
in getting our application to work with the XMC4700. I can only imagine that we are doing something wrong
with the XMC4700 (DMA Konfiguration, EBU Konfiguration,..) or there is an Errata we don't know.

So as I said we would be very interested in getting the XMC4700 working, so I can give you any information
you want for analyzing the problem. Maybe it is useful that you get a remote session to one of our development
computers or you got some samples from our hardware or some other information like the schematic.

Thank you for your help

Ingo