Dear all,
We would like use Phase Shift Full Bridge with two CCU8 slices and one ADC Channel. Two CCU8 slices output PWM waveforms. For safety reason, we would like implement cycle by cycle check for current value. In case the current value over some threshold, we hope we can disable the two CCU8 PWMs with the fast compare boundary flag.
We can disable one CCU8 slice when the boundary flag set right now, unfortunately, We could not find solution to disable two slices simultaneously. In Dave IDE, we can only connect the bound_fl_Channel_A Source signal with one PWM_CCU8_x, no way with two PWM_CCU8_x.
Attachment 3255Attachment 3256
We would like use Phase Shift Full Bridge with two CCU8 slices and one ADC Channel. Two CCU8 slices output PWM waveforms. For safety reason, we would like implement cycle by cycle check for current value. In case the current value over some threshold, we hope we can disable the two CCU8 PWMs with the fast compare boundary flag.
We can disable one CCU8 slice when the boundary flag set right now, unfortunately, We could not find solution to disable two slices simultaneously. In Dave IDE, we can only connect the bound_fl_Channel_A Source signal with one PWM_CCU8_x, no way with two PWM_CCU8_x.
Attachment 3255Attachment 3256