Cross Compiler for TriCore Architecture
Hello, Can any one help in getting Cross Compiler for Infineon TriCore Controller.? I am working on a project that uses AUTOSAR. I need to port Micro-Python onto this controller. For this, I need to...
View ArticleExclude APP from DAVE_INIT()
Hi, The DAVE_Init() is called from your main.c. You can write your own DAVE_InitEx() and called instead of the generated one. Regards, Jesus
View Articleoutput capacitance(igbt)
the output capacitance of the transistor(FF200R12KS4) is not specified. How to find it?
View ArticleClik here to view.
Infineon TLE9879 Eval Kit Bridge short problem
Attachment 3254Technical Assistance Center (TAC) don't has any answer.Moreover they do not answer about the faulty datasheet. I don't know how Infineon like automotive semiconductor MNC could make so...
View ArticleNever use Infineon microcontroller.
Infineon is a type of semiconsuctor company that never reply customers questions. The documentation is the industry's worst. Even if they publish datasheet with many mistakes.
View Articleworst semiconductor- Infineon
Who ever are coming to this forum, i would like to inform you that there are many problems with Infineon microcontrollers any you will not get any help from the company. It is the worst ever...
View ArticleUsing DMA on both USIC channels
Hi, On USIC module 2 it is possible. Did you try using the APPs? Regards, Jesus
View Articleoutput capacitance(igbt)
the output capacitance of the transistor(FF200R12KS4) is not specified. How to find it?
View Articleoutput capacitance(igbt)
the output capacitance of the transistor(FF200R12KS4) is not specified. How to find it?
View ArticleExample for temperature sensor
Using this code: /* Enable TSE */ XMC_SCU_StartTempMeasurement(); /* Calculate temperature of the chip in Kelvin */ temp_k = XMC_SCU_CalcTemperature(); Using the XMC1400 boot kit the function...
View Articleundefined reference to _HEAP_END_
hello together, I get the error bellow wenn I try to build my project in erika os....
View ArticleHow to use the GTM PWM trigger the vadc sample
I don't know how to trigger adc interrupt?
View ArticleXMC_VADC_GLOBAL_StartupCalibration () does not confirm that CALS becomes 1.
The function XMC_VADC_GLOBAL_StartupCalibration () in the program below does not confirm that CALS becomes 1. If it is not confirmed that CALS becomes 1 when the XMC is broken down, ADC may run without...
View ArticleClik here to view.
How to use one fast compare boundary flag as two CCU8 Slices trap input
Dear all, We would like use Phase Shift Full Bridge with two CCU8 slices and one ADC Channel. Two CCU8 slices output PWM waveforms. For safety reason, we would like implement cycle by cycle check for...
View ArticleHightec project for the TriBoard TC234
Hi Jan. How can i use TSIM simulator to simulation the input IO for Tricore MCU? how to create a input simulation file?is there a form to show the analog signal in TSIM? thanks.
View ArticleSupport for Micro-Python on Tricore Controllers
Dear Support Team, I am using TriCore controller and AUTOSAR is running on it. I need to port micropython Interpreter on to this TriCore controller. I have downloaded micropython source code from...
View ArticleXMC_VADC_GLOBAL_StartupCalibration () does not confirm that CALS becomes 1.
This issue was settled.
View ArticleXMC_VADC_GLOBAL_StartupCalibration () does not confirm that CALS becomes 1.
This issue was settled.
View ArticleXMC4200 HRPWM channels and diffrent CCU8 slices
Hello, I want to drive/trigger HRPWM hrc0 channel with the 'capture compare unit timer 1' (CCU8081). I've tried it with the following code below. Just copied the HRPWM initialisation code (without the...
View ArticleFAQ for XMC4800 EtherCAT
...Does really no one has the PHY selection issue? Which PHYs do you use with the XMC4800? Thanks in advance, Martin
View Article