Hi,
The XMC Link documentation states:
2.3 Power supply
XMC™ Link is powered from the Micro USB plug and typically draws about 70mA. The on-board voltage
regulator IFX54441LDV33 generates the required 3.3 V for the XMC4200microcontroller out of the 5 V USB
voltage. The debug probe is not designed to provide power for the target device.
The target application must power the isolated part of the debugger. The isolated side the XMC™ Link draws a
few mA of current from the target application.
Regards,
Jesus
The XMC Link documentation states:
Quote:
2.3 Power supply
XMC™ Link is powered from the Micro USB plug and typically draws about 70mA. The on-board voltage
regulator IFX54441LDV33 generates the required 3.3 V for the XMC4200microcontroller out of the 5 V USB
voltage. The debug probe is not designed to provide power for the target device.
The target application must power the isolated part of the debugger. The isolated side the XMC™ Link draws a
few mA of current from the target application.
Jesus