Hello,
I am trying use the simulation models of the ir2010 driver and irfb4321 mosfet in OrCAD. Both devices show the same problem during simulation:
ERROR -- Convergence problem in transient analysis at Time = 40.01E-15
Time step = 9.766E-18, minimum allowable step size = 10.00E-18
These devices failed to converge:
X_U2.D2
In the case of the ir2010 there is an OrCAD simulation model provided while with the irfb4321 the model is .spi and I save it as .lib with de MODELED program
I attach the caputure file folders (35.zip is ir2010 and 34.zip irbfb321)
I am trying use the simulation models of the ir2010 driver and irfb4321 mosfet in OrCAD. Both devices show the same problem during simulation:
ERROR -- Convergence problem in transient analysis at Time = 40.01E-15
Time step = 9.766E-18, minimum allowable step size = 10.00E-18
These devices failed to converge:
X_U2.D2
In the case of the ir2010 there is an OrCAD simulation model provided while with the irfb4321 the model is .spi and I save it as .lib with de MODELED program
I attach the caputure file folders (35.zip is ir2010 and 34.zip irbfb321)