ISO1I813T EVAl board documents having following description. I have found description that ISO1I813T can be used in direct mode also. (See blue highlighted text)
I have not found any documents how can I use ISO1I813T in direct mode? do you have any documents/application note which shows ISO1I813T working in direct mode.
-----------------------------------------AN_Eval_2x8_ISO1I813T_V10----------------------------
Application
This Application Note describes an Evaluation Board with two isolated 8 Channel IEC61131-2 compatible Digital
Input ICs for a wide range of industrial applications.
The board is designed to allow easy exploration of the features of the ISOFACETM Digital Input part. It contains
two ISO1I813T as an electrically isolated 8 bit data input interface in TSSOP-48 package. These parts are used
to detect the signal states of up to eight independent input lines according to IEC61131-2 Type 1/2/3 (e.g. twowire
proximity switches) with a common ground.
An 8 bit parallel/serial μC compatible interface allows to connect the IC directly to a μC system. The input interface
supports also a direct control mode and is designed to operate with 3.3/5V CMOS compatible levels.
The data transfer from input to output side across the galvanic isolation uses Infineon’s Coreless Transformer
Technology
-----------------------------------------AN_Eval_2x8_ISO1I813T_V10-------------------------------
I have not found any documents how can I use ISO1I813T in direct mode? do you have any documents/application note which shows ISO1I813T working in direct mode.
-----------------------------------------AN_Eval_2x8_ISO1I813T_V10----------------------------
Application
This Application Note describes an Evaluation Board with two isolated 8 Channel IEC61131-2 compatible Digital
Input ICs for a wide range of industrial applications.
The board is designed to allow easy exploration of the features of the ISOFACETM Digital Input part. It contains
two ISO1I813T as an electrically isolated 8 bit data input interface in TSSOP-48 package. These parts are used
to detect the signal states of up to eight independent input lines according to IEC61131-2 Type 1/2/3 (e.g. twowire
proximity switches) with a common ground.
An 8 bit parallel/serial μC compatible interface allows to connect the IC directly to a μC system. The input interface
supports also a direct control mode and is designed to operate with 3.3/5V CMOS compatible levels.
The data transfer from input to output side across the galvanic isolation uses Infineon’s Coreless Transformer
Technology
-----------------------------------------AN_Eval_2x8_ISO1I813T_V10-------------------------------