hello Casey,
I have replied you in PM.
While doing our research we reached this results:
Here you can see the current and motor speed.
The motor is rated at 7200 rpm max, and there was some load. It wasn't a critical load, but the motor wasn't free either.
Current measurement changes a lot, and is one or two amps under what I measure with an external amperomenter.
Attachment 4947
Next there is flux and motor speed, for the same motor of the previous graph.
Attachment 4948
The motor spins and does what it is supposed to do.
My only possible complain is a high current consumption, may it be caused by the noise in the PCB or it is more likely to be a configuration issue?
I have replied you in PM.
While doing our research we reached this results:
Here you can see the current and motor speed.
The motor is rated at 7200 rpm max, and there was some load. It wasn't a critical load, but the motor wasn't free either.
Current measurement changes a lot, and is one or two amps under what I measure with an external amperomenter.
Attachment 4947
Next there is flux and motor speed, for the same motor of the previous graph.
Attachment 4948
The motor spins and does what it is supposed to do.
My only possible complain is a high current consumption, may it be caused by the noise in the PCB or it is more likely to be a configuration issue?