Hi to all,
i want to control the Vadc over an external Interrupt. For this puposes i need the ERU module. I use also the iLLD's. I have read the ERU Training with interrupt generation and this worked for me. The Problem is to trigger the Vadc with the ERU.
The ERU have the following configuration: outputChannel is 0, triggerSelect is also 0 and the gate signal is alwaysActive. The VAdc is configured for triggerSource_7 => eru_iout_x (manual page 28-157) and should trigger an Interrupt when conversation ready.
The Vadc work fine with the CCU6 but not with the ERU. I dont know why?could someone help me?
i want to control the Vadc over an external Interrupt. For this puposes i need the ERU module. I use also the iLLD's. I have read the ERU Training with interrupt generation and this worked for me. The Problem is to trigger the Vadc with the ERU.
The ERU have the following configuration: outputChannel is 0, triggerSelect is also 0 and the gate signal is alwaysActive. The VAdc is configured for triggerSource_7 => eru_iout_x (manual page 28-157) and should trigger an Interrupt when conversation ready.
The Vadc work fine with the CCU6 but not with the ERU. I dont know why?could someone help me?