ABM header with optimization
Hello, if I use the Bootloader IAP XMC47 example without any optimization it works properly. But if I use any optimization level the abm header is no longer available. Optimization (-Os / -O1) Code:...
View ArticleHow do I slow the motor speed update rate to once every 10 seconds from 1/s
I want to slow the motor speed update rate to once every 10 seconds or so without jitter. My BLDC SCALAR HALL XMC13 UCProbe motor kit currently updates once per second. To eliminate speed jitter how...
View ArticleFatFs returning error when writing large files.
In the file "sdmmc_block_private_sd.c" the function SDMMC_BLOCK_SD_GetSectorCount() computes the wrong sectorCount for "Standard SD (and MMC) cards" if csd_v1.read_blk_len is zero. For all 1GB SD-Cards...
View ArticleClik here to view.
XMC4500 Flash protection in practice?!
Get MemTool 4.07.03 and connect to it using ASC Bootstrap (P1.4 RxD, P1.5 TxD) at speed 57600. Looks like Flash Protection supported only for XC166 family Attachment 2961 ????? Memtool.png‎ (31.5 KB)
View ArticleUSB mouse problem
When I connect the Aurix platform to the computer via USB, it effects the behavior of my mouse. It jumps to the right of the screen every few seconds and so I can't click on anything. Any suggestions?
View ArticleEthernet Demo - Outbound communication
Try read this post: https://www.infineonforums.com/threa...5153#post15153
View ArticleEthernet problem solving on TC23x
The second problem, if u have reconfigured MDIO port, u have to add delay after PHY reset. So boadr will work after reset without debuffing.
View ArticleIFX91041 temperature rise
Hello, I use the IFX91041EJV50 to generate a voltage of 5VDC from 24VDC. The switching controller works electrically as expected, but the module is already unusually warm at 0.8A output current. A...
View ArticleABM header with optimization
Hi, Please try defining ABM0_Header as: Code: static const ABM_Header_t __attribute__((section(".flash_abm"), used)) ABM0_Header = {   .MagicKey = ABM_HEADER_MAGIC_KEY,   .StartAddress =...
View ArticleUsing abm header with optimization
See https://www.infineonforums.com/threa...ll=1#post15161
View ArticleXMC4500 32-bit concatenated timer
Hello, I was having similar problem with concatenated timers and the examples provided by infineon lack explanation of how formulas actually work out. any way, a bit of search on the web I came across...
View ArticleLooking for the XC164CM UCAN Starter kit USB stick
Hi All, Maybe someone here has an extra one they can part with. I'm trying to use one of the application examples listed on the Infineon website AP 32132 for a CAN Bootloader and it seems I can't order...
View ArticleTwinCAT Run Configuration XMC4800
Hi Lukas, can you be a little more specific what you mean by, "In TwinCAT I configured one special CPU just for TwinCAT to make the application Realtime-capable" What kind of modifications did you...
View ArticlePin Allocator
Finally I got it to work again. I had to reinstall Dave and on top of that I deleted the D_librarystore_4.1 file. After that Dave suggested an update, which I ignored this time and now it works. So my...
View ArticleClik here to view.
LCD Drive using EBU
Figure 14-17 shows an example of a read access to a multiplexed device (Reference Manual 14-45) Attachment 2973 This is the one pperation mode that I try to config but the EBU Pins are calm and nothig...
View ArticleIFX91041EJV50 get hot
Regrettably, there are no efficiency curves as requested available in the documentation. For the test layout you mean the IFX91041 Application Information and the datasheet has been used as the source...
View ArticleTC 297 evaluation board SPI driver
I am working on TC 297 evaluation board SPI driver. I am using Tasking compiler, ETAS AutoSAR OS and IC5000 debugger. SPI driver is configured to use synchronous transmit APIs, QSPI0 is used as master....
View ArticleStatic memory analyzer- SMA
there seems to be a elftool, which can open your elf and does the anaylsis.
View ArticleEtherCAT configuration with ECAT_SSC - p24Hxxxx.h unknown
Hello, replacing these files didn't help in my case! I use the XMC4800 Relax EtherCAT Kit and when i rebuild the project in Dave, i get this error: "el9800hw.h:31:22: fatal error: p24Hxxxx.h: No such...
View ArticleHow to properly use VADC port to read value from an external potential meter?
Hi there, I have a PMSM motor which is controlled by XMC1302T038 mcu with sensorless FOC and now I want to control its speed by connecting an external potential meter to pin 2.5 of XMC1302. However I...
View Article