Clik here to view.
No BMI Button In Dave4
Hi, I'm trying to connect to XMC4200Q48 using the XMC-Jlink, I cant get it to work, and the next Error shoos: Could not connect to target. Please check if target is powered and if ribbon cable is...
View ArticleXMC1400 Hardware Registers
Dear All, does anybody know where I can find a list of the XMC1400 hardware registers? I want to use the ASC (UART), but can't find information on the baudrate regsiters ie. BRG.PDIV bits, etc. Thanks...
View Articlejlink on a raspberry pi cant connect to xmc-link
Solved! by executing "sudo ./JLinkExe" in the JLink folder it worked
View ArticleClik here to view.
XMC Library for Embedded Coder®
Quote: Originally Posted by HHH9981 The missing peripheral functions are communication systems such as "UART", "SPI", "I 2 C". I want a sample model of EtherCAT I want you to correspond to MATLAB...
View Article6V (signal voltage) TVS with low package height
Hallo Dan, are there other requirements in the application except working voltage? What is required protection level? What is small/thin for you? Very few of our products are leaded, most are in...
View ArticleXMC1000_DFP lib update
When will the Keil v5 XMC1000_DFP be updated? At 23/6/2017 the Keil v5 XMC1000_DFP web site download version is 2.5.1 This has xmc_uart.c using XMClib version v2.1.8 Dave 4.3.2 gpdsc export for...
View ArticleVADC queue mode conversion triggering in TC23x TriCore series
Dear Community! I'd like to seek for a little help configuring the VADC module of the above mentioned chip. I want to carry out a well defined sequence of measurements, using the VADC module, by...
View ArticleDissertation Writing Help
Writing your own dissertation can be frustrating.* Good thing, there are a lot of dissertation writing service online, you just need to find the right company that meets your standard and your budget.*...
View ArticleClik here to view.
Error occured while connecting to the solver process
hi I am getting this error "Error occured while connecting to the solver process" while creating project or switching between projects. Attachment 3007Attachment 3008 regards, Arvind. ????? error.PNG...
View ArticleFAQ for XMC4800 EtherCAT
Hi , I'm new to EtherCAT and I was trying to work on EoE. Is there any example for EoE ? thanks in advance, Vinay
View ArticleXMC4500 CAN Communication
Hi, normally a CAN controller transmits the message automatically until a valid acknowledgment is sent out from another node in CAN network. So connect a receiving node at your CAN network and it...
View ArticleClik here to view.
Save electricity during daytime
Quote: Originally Posted by thompsonamy There are many articles available on google about this. It is better to go through with one by one properly. If you want to know more about this go through with...
View ArticleCan Communication Doubts
Hi Matteo, I see there are still some issues present...the problem is that I cannot guarantee that the problem doesn´t come from hardware while you´re using your own CAN transceivers. So, we need to...
View ArticleSPI to Memory transfer (PGDMA)
Hi, I'm trying to read the input from an SPI interface trough GPDMA to the memory of an XMC4800. In detail: With a high interrupt frequency (PWM) I'm sampling the SPI interface. On every interrupt when...
View ArticleClik here to view.
Debug Problem
Attachment 3011 After reading similar threads and trying several fixes, I remain with this server error. Regards José BarbosaAttachment 3013 ????? Dave debugger error.PNG (47.2 KB) Dave debugger...
View ArticleClik here to view.
Problems with Universal DAS and Tricore TC-297
I'm trying to use the Infineon Debug Access Server (v.6.00) together with Altium TASKING for flashing and debugging a program onto the AURIX Tricore TC297x board. When the TASKING IDE switches to the...
View ArticleiLLD driver vs MCAL driver which one should be used?
Hello~ maybe iLLD Driver doesn't meet specification in AUTOSAR interface. so you should use MCAL.
View ArticleXMC4400 LAN port active question
Hi~ I have a question. we want to connect LAN port of XMC4400 EV kit(DAVE 4) and another server system. To connect LAN port of XMC4400 need several socket I/O head file(ex: #include...
View ArticleDAVE4 connect LAN(lwip) port question
Hi~ I have a question. we want to connect LAN port of XMC4400 EV kit(DAVE 4,lwip) and another server system. To connect LAN port of XMC4400 need several socket I/O head file(ex: #include...
View ArticleConditional mis-compilation
Hi David, Maybe you can try with compiler option -save-temps. Regards, Jesus
View Article