Connection closed by the GDB server - no source available for "0x0"
I have a similar problem, it terminates after downloadig the program. Infineon left us alone.
View ArticleHow to run Programm on XMC1100 without DAVE
Hi aurixuser, Many thanks for your reply. I tried straightaway, then got diverted off. But back on the topic again now. Yes, I've tried the Infineon XMC Flasher, with same results. I can see that the...
View ArticleRelease build
Hi all, I'm not sure on DAVE Forum etiquette, for referring to a post on another Infineon Forum. So do please let me know, if not appropriate. I know one shouldn't post the same thing, to two different...
View Article24 GHz Radar
Hello all, We have purchased 24 GHz Radar and were trying to do some measurements. However there are too many ghost targets appearing on the GUI. We are doing in open space indoor measurements....
View ArticleClik here to view.
How to create PLL loss of lock ?
We're using Aurix Tricore SAKTC297 Microcontroller. The microcontroller is wired with external Crystal / Ceramic Resonator Mode with external components. Safety Management Unit (SMU) alarm will be...
View ArticlePorting lwIP + ERIKA on TC29x board
Hello I have issues while porting lwIP (lightweight IP) into ERIKA enterprise RTOS on TC297A-step board. lwIP stack requires semaphore and mailbox implementations written into sys_arch.c file. For...
View ArticleSPI Slave WriteData Problem
Hi, I have 2 XMC4500. 1 configured as Master, 1 as Slave. I can receive the words, which are sent by the master in the slave. But as soon i want to write data back via "SPI003_WriteData", the data,...
View Articlexmc4500 wake up from hibernation bit HIBWK is never set
Hello, I can send the system into hibernate and wake it up upon RTC event but the HIBWK of the RSTSTAT is never set. I always have 7 in that register after start (or 15 when debugging). I also couldnt...
View ArticleConnect both OPC-UA LWIP and TwinCAT SSC to XMC4800
Hi all, I'm trying to connect XMC4800 with both OPCUA reference Client and also by TwinCAT SSC slave. Is it possible ? I've merged the examples, ETHCAT_SSC_XMC48 with
View ArticleConnecting both OPC-UA LWIP and EtherCAT SSC slave to XMC48
Hi all, I'm trying to connect both OPC-UA LWIP and EtherCAT SSC TwinCAT slave to XMC48 Is it possible ? I've merged examples ETHCAT_SSC_XMC48 and OPCUASERVER_LWIP_XMC47. The SSC slave works fine, but...
View ArticleWhat is the download link for EABI 3.0 Spec from Infineon for AURIX
Hello Support, Can you please provide me the Version 3.0 EABI Spec from Infineon AURIX devices? Thank you. Regards
View ArticleUSB VCOM APP integration
Hi jptalledo, I just started modifying the code and wondered if you got yours to work? Any issues?
View ArticleUSBLIB_VIRTUALSERIAL_XMC45: Nothing is sent back to Host after reconnection
Hi, We are checking the issue. In the mean time please use the DAVE CE example, USBD_VCOM_APP_EXAMPLE_XMC45. Regards, Jesus
View ArticleProblems with erasing and programming PFlash on AURIX TriCore (tc0), TC277-DC
Update: By using the UDE Starterkit Debugger by PLS, I can now see that the Infineon FlashDemo code is entering trapcontext() when attempting to modify the PFlash sector. Some time after successfully...
View Articlevariable at fixed memory address
Hello Min Wei, I have tested your suggestion and it works as far as I am in debug mode. If I switch to Release it doesn’t work any more. I found out the reason: Debug Setting -> Optimization Level:...
View ArticleBldc motor commutation pattern
Hello all, Will the commutation output pattern be differed for various pole pairs? For example; when we use 1 pole pair: mech revolution(360°)/1 pole pair= 360°, that means rotor travelled one full...
View ArticleXMC4200 DAC Problem
Hi Everyone, I am working on XMC4200 DAC driver. In pattern generation mode, I want to generate a sine wave at the 8KHz frequency. I am getting sine wave but the voltage is 2V only but as per reference...
View ArticlePOSIF PDBG register always returns 0
I have modified the BLDC_SCALAR_HALL_XMC44 app for the XMC4800 Relax Kit. I am using PORT 14, pins 7, 6, and 5 as POSIF0.IN0B, IN1B and IN2B respectively. I am trying to use the PDBG register to...
View ArticleBSDL-files for XC2000
Good day! Using the sak-xc2287m-104f80l device. Does the xc2000m family support boundary scan or not? As I inderstood, other xc2000 families like U or L support it.
View Article