EBU low throughtput on TC1793
Hello! I'm having some trouble reading an external RAM at full speed on TC1793. I've configured the EBU to run at 67.5 MHz, with 1 address and 1 wait cycle. Measuring the throughtput, I've obtained...
View ArticleXmc debug
Hello Andi, Where is this "Launch Terminal" window? Thank you. :) Best regards, Petru
View ArticleTimer input module CMU clock configuration.
I am using a tricore TC277 with Hightec compilers alsong with infineon illds. I was trying to configure TIM0 , Channel0 for PWM measurement from a port pin. When i try to configure the clock(GTM CMU...
View ArticleTimer input module CMU clock configuration.
I am using a tricore TC277 with Hightec compilers alsong with infineon illds. I was trying to configure TIM0 , Channel0 for PWM measurement from a port pin. When i try to configure the clock(GTM CMU...
View ArticleAurix 2G Free Entry Tool Chain Interrupt on all cores
Hi there, recently I got a Triboard with an Aurix 2G on it. Programming on all cores is really straight forward except if it comes to interrupts. Interrupts do work only on core 0. There seems no way...
View ArticleDebuger for XMC microcontroller
Hi, I need to buy a debuger for XMC 1302 Microcontroller. Any recommendation? thanks,
View ArticleClik here to view.
Memtool for Aurix TC2X7 V1.0:
Hi, I am trying to use memtool for Aurix TC29x controller. I have connected target with miniwiggler. When I open DAS device scanner I see that device is detected as "DAPE". Attachment 3355 Attachment...
View ArticleProgram always hangs at Default_Handler
Hi, recently my program started to stop in the Default_Hnadler for Exceptions. I think the cause is the DS_ADC_DEMOD App. I tried to enable the trigger Function for it, but I couldn't figure it out, so...
View ArticleLIN on xmc4800
Hi, I am trying to do some modifications for uart drivers for xmc4800 (on relax kit xmc 4800) and extending them to LIN drivers. When I followed the documentation of Infineon reference manual for LIN...
View ArticleTLE987x(Eval Kit) reset problem when UART added
Hi Litun, There are some additional informations about the Watchdog WDT1 in the FAQ Application Note. You can find it here: https://www.infineon.com/dgdl/Infine...5ba9870bd91373 The Watchdog WDT1 is...
View ArticleXMC Flasher is not working
Hi Stefan, can you please open the Command Prompt in the folder where XMC Flasher is located and type "XMCFlasher.bat -debugTool". Check can it find Segger.dll. Best regards, Deni
View Article#error "GLOBAL_ADC requires XMC Peripheral Library v2.0.0 or higher"
Hi, Infineon, there must be an easier solution. I tried the usual 'Install DAVE APP/Example/Device Library' and 'DAVE Project Upgrade > APPs Upgrade' But neither of those made a difference Regards,...
View ArticleDave 4 compilation problem
The error ticket #392707691 says the problem has been fixed in Dave 4 Release 4.1.14 but we are facing the same issue in Dave 4.3.2. It seems like the fix has been droppped somehow.
View ArticleTLE987x(Eval Kit) reset problem when UART added
Hi Litun, There are some additional informations about the Watchdog WDT1 in the FAQ Application Note. You can find it here: https://www.infineon.com/dgdl/Infine...5ba9870bd91373 The Watchdog WDT1 is...
View ArticleTLE987x(Eval Kit) reset problem when UART added
Hi Litun, There are some additional informations about the Watchdog WDT1 in the FAQ Application Note. You can find it here: https://www.infineon.com/dgdl/Infine...5ba9870bd91373 The Watchdog WDT1 is...
View ArticleCAN Repeater / Retransmitter - handling Remote Frames
I'm trying to receive these RTR packets (what Infineon calls "remote frames") into a FIFO. Another device on the CAN network is generating these packets and I need to receive them. I don't want to...
View ArticleTLV493D returns NCK
Hmm... We have already produced over a thousand units with this circuit and difficult to change parts of them from now. I want to try to improve it without any changes to schematics. I found "General...
View ArticleSPI Slave on XMC 4700
Just wanne bring this up. Is no one from Infineon able to help ? This seems to be an issue I think. I just only use thew Dave APP. Going down to XMC lib doe
View ArticleTLE987x(Eval Kit) reset problem when UART added
Hi Litun, There are some additional informations about the Watchdog WDT1 in the FAQ Application Note. You can find it here: https://www.infineon.com/dgdl/Infine...5ba9870bd91373 The Watchdog WDT1 is...
View ArticleTLE987x(Eval Kit) reset problem when UART added
Hi Litun, There are some additional informations about the Watchdog WDT1 in the FAQ Application Note. You can find it here: https://www.infineon.com/dgdl/Infine...5ba9870bd91373 The Watchdog WDT1 is...
View Article