TC224 resets every 5 seconds
void workaround() { const uint16 program_sequence[] = {0x8756,0x87DE,0x86AD,0x8625,0x8D27,0x8811,0x87BE, 0x8668,0x877D,0x8795}; uint16 i, rx_array[10]; uint16 password =...
View ArticleTLE987x bridge driver current limitation?
Hi Jacko, what types of MOS-FETs are you using? The TLE987x has a maximum total charge driver capability of 100 nC. The IC is able to drive motors up 1kW. Maybe your power - supply has a voltage drop?...
View ArticleFigure out size of Flash memory on XMC4800 automatically
I havent found such a register. You could try to write to a flash memory location which does not exist for the 1 and 1.5 MB version and check the result. If it works without an error, it's the 2 MB...
View ArticleXMC4200 hexagon kit UART with XMClib
Hey, regarding the XMC 4200, is it possible to use this software to send a simple string to a Bluetooth app on your phone, for instance?
View ArticleAngular + 3D Joystick Motion Detection:
I have same question, anyone can explain that, thanks and best wish to you
View ArticleXMC1400 E_EEPROM(dave ce) merge with blinkyMCAN Problems
Hi Jesus, Thank you for your suggestion. I have checked the project properties and it support CAN. Do you have a sample program for using the emulated eeprom without using the dave apps?(the error...
View ArticleXMC1400 E_EEPROM(dave ce) merge with blinkyMCAN Problems
Hi Jesus, Thank you for your suggestion. I have checked the project properties and it support CAN. Do you have a sample program for using the emulated eeprom without using the dave apps?(the error...
View ArticleXmc 4200 uart
Does anyone have a working UART project using the XMC 4200 ? The Dave sample projects do not seem to have this version as a sample project. Thanks.
View ArticleClik here to view.
40 KHz instead of 200 KHz
Quote: Originally Posted by Mueller101 Hi everybody, I use the uC XMC4500, but I configure 200KHz in Dave at the oscilloscope I read only one fifth, ie 40 KHz. Someone will have an idea? Hello, Did...
View ArticleTc23x Controller Multican+
Hi, I have tried to test the bus-off status (CAN_H shortened to CAN_L) In my case the registry ECNT.REC is taking the value 101 (bit0 error) and the CB.INIT is 1 (deactivate state), both registers TEC...
View ArticlePWM phase shift
Hi :) Im using an XMC4500 with DAVE3, i need to generate 8 PWM signals to controle a Dual Active Bridge, 4 (2 inverted output ) PWM signals from CCU80 and the same from CCU81. Using the the function...
View ArticleXMC4500 SPI and ETH_LWIP
HI~ I have a question with XMC4500 connecting SPI receive data and ETH_LWIP The LAN(ETH_LWIP) connection is lost while receiving data using the SPI. What is the way to connect both SPI and...
View ArticleHow long do post approvals take here
Yet this post wen't through in an instant. What's the issue then?
View ArticleAurix TC277 TOM configuration
Hello all, I'm trying to use the TOM for output generation of PWM. The PWM works, but I'm having issues with the FXCLK selection. FXCLK[0 ... 5] is the clock source for TOM and should offer different...
View ArticleMATLAB interface plugin Distance2Go 24 GHz radar demo kit
Hey, yes thank you, I found it in the meantime :)
View ArticleInfineon Distance2Go horizontal angle is always zero
Hey there, I am working with the Infineon Distance2Go 24 GHz radar demo kit for ranging, movement and presence detection. I have a question about the horizontal angle which is 42° as mentioned in the...
View Article3D Scanning with Sense2Go
I spent some time trying to figure how it could work but had no any good idea since Microsoft officially ceased production of the Kinect. Still you can use it for now with any 3D software. May be...
View ArticleAURIX TC27x Lockstep
Hi, I don't understand the lockstep configuration of the AURIX Tricore TC27x. It is possible to run CPU 0 and 1 in lockstep mode. So does the Tricore has 3 cores plus 2 checker cores? Or do I have to...
View Article