XMC1400 E_EEPROM(dave ce) merge with blinkyMCAN Problems
Hi Jesus, Thank you for your suggestion. I have checked the project properties and it support CAN. Do you have a sample program for using the emulated eeprom without using the dave apps?(the error...
View Articlequestion for XMC1300 LLD libary
the following codes are extrated form LLD driver, which the filed name is "system_XMC1300.c" which guy can tell me why do this operating? Clock = ((uint32_t)ClockVal) * KHZ_MULTIPLIER; Clock = Clock...
View ArticleXMC4500 CNT001 in Gating mode can not be reset?!
Hello, I have got XMC4500 Relax Lite Kit and task to calculate a number of pulses for certain period of time. Say, the frequency around 10MHz due 1mS time interval. I decided to use the CNT001...
View ArticleXMC1400 E_EEPROM(dave ce) merge with blinkyMCAN Problems
After instantiating the emulated eeprom app in the a CE project, you can simply copy the Dave/generated folder to the IDE project.
View ArticleFAQ for XMC4800 EtherCAT
Dear engineers, I recently study cia 402 on the xmc4800 which is the motor driver, but I can only find the example of cia 402 of ET1100. *** So I want to ask: *** 1. Are the examples of cia402 based on...
View Articlecia402 on xmc4800
Dear engineers, I recently study cia 402 on the xmc4800 which is the motor driver, but I can only find the example of cia 402 of ET1100. *So I want to ask: 1. Are the examples of cia402 based on ET1100...
View ArticleHow to read CHIP_ID of TLE987x
Hi All, I read the CHIP_ID of TLE987x through USER_READ_100TP, but the ID bytes are aways zero. How to read the correct ID? According to BootROM User Manual, the Chip_ID bytes can be read via BSL mode...
View ArticleXMC4500 CNT001 in Gating mode can not be reset?!
Hello, I have got XMC4500 Relax Lite Kit and task to calculate a number of pulses for certain period of time. Say, the frequency around 10MHz due 1mS time interval. I decided to use the CNT001...
View ArticleXMC1400 E_EEPROM(dave ce) merge with blinkyMCAN Problems
After instantiating the emulated eeprom app in the a CE project, you can simply copy the Dave/generated folder to the IDE project.
View ArticleXMC4500 CNT001 in Gating mode can not be reset?!
Hello, I have got XMC4500 Relax Lite Kit and task to calculate a number of pulses for certain period of time. Say, the frequency around 10MHz due 1mS time interval. I decided to use the CNT001...
View ArticleXMC1400 E_EEPROM(dave ce) merge with blinkyMCAN Problems
After instantiating the emulated eeprom app in the a CE project, you can simply copy the Dave/generated folder to the IDE project.
View ArticleNewbie with the usual questions.
Can anybody explain in detail about how to use the IRMCF143 IC for motor control, please.
View ArticleDifference between MCE+MCU and only MCE in iMOTION technologies.
Hello, people. I have been puzzeled in between IRMCK099M and IRMCF143 IC's from iMOTION technologies. I want to design a controller circuit ofr induction motor and I was reading about this two IC's. It...
View ArticleXmc 4200 uart
HI... here is the basic UART project that transmits the message on the terminal. Would also like to highlight that this example is exactly the same as one provided inside of XMCLib package under...
View ArticleClik here to view.
XMC4200 hexagon kit UART with XMClib
I´ve provided the answer to another thread you opened (I´ve made the example for the XMC4200 CPU board so you may need to change pin layout). The issue that you see with the J-Link is not caused by the...
View ArticleBoundary Scan file for SAK-XC2298H-200F100L
Hello all Does anyone know where can I get the boundary scan file for the device SAK-XC2298H-200F100L? The package LQFP-176. thank you
View ArticleXMC4800 EtherCAT CiA402 Profile
Hi Mophong, I have the same questions about XMC4800 CiA402. Can you share the LAN9252 CiA402 example？ Any help will be appreciated. Thanks!
View ArticleClik here to view.
XMC1400 BOOT KIT XMC1400_IIC_Master example
hello, I am trying to run the XMC1400_IIC_Master example. I have a 2kOhms pull-up resitance on SCL and SDA. The problem I have is that the SCL stay at Vdd and SDA shortly goes to GND and it never...
View ArticleIO acess in IRMCF188
/ I am trying to use IO of the controller. Can anyone share the exper with IRMCF188? because i am unable to find any register associate for IO. what i find PnDIR, InSEL etc
View Article