IGBT equivalent load
Hi, I am using FF450R12KT4 IGBT module for my project 3phase inverter. I want to test power supply for IGBT gate driver IC at -20degC with full load ( i.e. all 6 PWM channels are ON). But in order to...
View ArticleFeatures
Hi all, I need help with the protection features available in every IPM. how do i implement these? Thanks in advance
View ArticleTLE5012B in bus mode
In my application, I need to use four TLE5012, read through SPI. Four chips, I use 1 CLK, 1 DATA, 4 CS connections. A single one can be used normally. But when four are used together. When one CS line...
View ArticleMissing Git in Dave V4.4.2
ok, that worked => using http://download.eclipse.org/egit/updates-4.6.1 (with ...-4.6.1) does the trick
View ArticleClik here to view.
IPM control
Quote: Originally Posted by TechGirl Hi guys one question, how can I control my IPM? Any motor control microcontroller can be programmed to control IPMs. If you are looking for an Infineon solution,...
View ArticleClik here to view.
Evaluate IPM
Quote: Originally Posted by Gyro Gearloose Hi all, Are there any design references available for the IPM that I have chosen? Many thanks in advance! If you look in each IPM's datasheet, there is...
View ArticleClik here to view.
Heatsink and IPMs
Quote: Originally Posted by TondGy Hi guys, can you please give me some hints on which heatsink I should I select for my IPMs? Thanks! Finding a sufficient heat sink most likely will include an...
View ArticleClik here to view.
Connecting to IMC101T-T038 via IMOTION-LINK Debug Probe
SOLUTION Hi all, This issue that has now been fixed in revision v1.1 of IMOTION-LINK. All devices shipped past June 2019 have resolved this issue. You can tell the version of your IMOTION-LINK by...
View Article[AURIX2G] [Flash] How to add boot mode headers for TC397 controller
Dear Sir, I am using TC397 EV Board. do you have some sample code to flash boot mode headers. could you please some user manual for adding the BMHD in code. and what is the difference between AURIX and...
View ArticleCIPOS IGCM20F60GA minimum ON time
Hello All, I'm using IGCM20F60GA as three phase driver. in the data sheet is not reported the minimum ON time of this module. I mean what is the minimum pwm ON time I can apply to the driver without...
View Articlepurpose of bootstrap capacitor?
What is purpose of bootstrap capacitor and how do I size it?
View Article'Coloring source file' has encountered a problem
Hello, I'm trying to follow the getting started instructions with distance2go and have got as far as trying to run debug on the example project in Dave. There are no build errors or problems reported,...
View ArticleCCU42 on XMC 4100 (or 4200)
It seems there are only 2 CCU4s on the xmc4100/200. Not very clear from the reference manual but seems to be shown in here
View ArticleSW Framework Tools for iLLD latest version 1_0_1_11_0
Hello, The latest version of SW framework tools(Release version: 3.1r0) provided from Infineon uses Infrastructure drivers from iLLD_1_0_0_8_0. Please let us know if we can get access to an updated...
View ArticleSW framework tools(3.1r0): Make build error with example template project TC26xB
Hello, We are trying to build the BaseFramework_TC26xB template project out of box from the SW framework tools (3.1r0) using the dcc compiler version 5.9.6.3. Upon building we are getting the following...
View ArticleXMC1402 ADC Event Interrupt With FIFO
I'm using the Dave app ADC_MEASUREMENT_ADV. One of the channels has a FIFO of 4 stages. Can I trigger an event interrupt when that channel's ADC FIFO is half way full? Cheers
View ArticleQSPI with DMA problem on TC234
I'm trying to use the QSPI with DMA, and as usual, the IfxQspi and IfxDMA libraries are extremely buggy. I have fixed all the bugs I have found so far, and this is the current situation: o QSPI...
View ArticleClik here to view.
IRMCF171 I can not start
Quote: Originally Posted by dronnet Good day. I have been communicating with technical support for a long time and cannot solve my problem in any way. I just can not make the IRMCF171 work. Can you...
View ArticlePCB footprint
Hi guys, I am currently looking for a PCB footprint for my IPM. Where can I find those? Many thanks in advance!
View ArticleParalleling
Hi guys, In my new power stack development I have to parallel all HD's in EconoPack Plus module. Do you have any recommendations on this? Many thanks!
View Article