Timer application for TC275B controller
Hi, I am very new to the Tricore micro controller. Also, I have an intermdiate knowledge in micocontroller programming. I have to measure the process time of the set of code in tricore(core0) The code...
View ArticleI2C configuration code
Hi Nicolas, I´ve took a quick look to the BMP280 specification and it seems to me that you´re providing wrong slave address in your code. In the Chapter 5.2.2 I2C read of the mentioned document, it´s...
View ArticleHow to know the state(ideal/Busy) of other cores(core1/2) from the master...
Hello, I want to know the status of the other cores i.e, core 1 and core 2 CPU's are in ideal state or busy state from the core 0. Is there any possible way to know the status of other cores. Thank...
View ArticleHow to configure a interrupt
Hi, can you please tell me which board are you using? I saw that you mentioned in some other post that you´re doing a project for XMC1302 and while that microcontroller does not have CAN module, I...
View ArticleUSBD-VCOM Problems
Hello , I have problems with the VCOM Interface . We use an XMC4200 Controller and send data all the time to the host PC . It serves well. If the user cut the USB- cable , the USBD_VCOM_SendData App...
View ArticleBenefit of using custom essay writing service
Why Do Students Feel As If They Need Them? I recently had the opportunity to speak with a former writer for a prestigious essay writing service and his experience in the industry. “I have witnessed the...
View ArticleGet 16 consecutive samples - ADC
Hi apereira, Thank you for your reply and I apologise for taking my time to answer this. Here's how my setup works: I do have an interrupt that triggers when the conversion is finished. However, I...
View ArticleADC - Combining multiple gating/trigger signals
Hi apereira, ERU seems like it could work. However, combining multiple triggers seems to work poorly for whatever I am trying to do - it appears that it is best to use multiple groups, of which one is...
View ArticleClik here to view.
ADC XMC4500 - Result is not usable
Quote: Originally Posted by Niclas Can you set breakpoints in the rows with the functions with which you switch the LED on and off? I wanna see if the program gets there...specifically to the function...
View ArticleCCU4: Measure PWM duty cycle and period
Hello everybody! I would like to measure the PWM duty cycle and the time of the pulse of an external signal. In this respect, I used the CCU4_SLICE_CONFIG App of Dave4, changed the Mode to "Capture"...
View Articlevivek sharma
Rajasthan is a northern Indian state bordering Pakistan. Its palaces and forts are reminders of the many kingdoms that historically vied for the region. In its capital, Jaipur, are the 18th-century...
View ArticleHRPWM problem on XMC 4200
hi, I have a problem with the HRPWM unit on a XMC4200. The problem is that when I write the values 0x3A or 0x3B into the SCR1 and SCR2 registers, a puls is missing every now and then in the output...
View ArticleSecond level protection triggering too soon (naza-m light)
Hi people, I have a problem with the voltage protection on my new DJI F450 with the naza light. I used the following settings for the voltage protection: First level: no load 10.5v, loss 0.2v Second...
View ArticleHW Connections for an interleaved PWM pattern
Hi there, i wanted to use a PWM timer to implement an interleaved PWM pattern; so there should be four PWM outputs with an adjustable interleaving time. I could not see any other way than to try to use...
View ArticleProblems with restarting a PWM using the PWM_CCX_stop/PWM_CCX_start routines
Hi there, I want to stop and eventually restart my PWM channels. To do so, I thought the implemented PWM_CCU8_start(&PWM_CCU8_0) / PWM_CCU8_stop(&PWM_CCU8_0) routines could be used. The first...
View Articlehow to clear the buffer full in UART
Hi, I am working on XMC1100, While Sending Data Through the Terminal to xmc1100. Data Lost was happening. and the buffer full flag is enabled. The UART Cofiguration as below baudrate = 921600. Rx = pin...
View ArticleSEGGER SystemView
Hi Henri, could you please tell me the version of RTT, StreamRecoder, FreeRTOS and Jlink Firmware version? I am having problem to get the streaming mode to work. The data traffic works since I could...
View ArticleWDT - How to configure the Watchdog timer
Hi all, I trying to configure a Watchdog timer on my XMC4400 board. So far, I was able to successfully write the code that would service the WDT from CCU ISR. The way I would test it is by configuring...
View ArticleTC275 questions
If these questions are answered in some document, please point me in that direction. How much cache does each V1.6.1 core have ? What is the "set association" of each V1.6.1 core ? How big is a cache...
View Article