Clik here to view.
IRMCK099M custom GPIO functions
Hello, The page 61 of Application Guide describes the OUT1 and OUT3 (see below). The register value from 0 to 7 corresponds each bit value of OUT1 (LSB), OUT2 (bit position 1) and OUT3 (bit position...
View ArticleASC Bootloader Example - Unable to access
Hi Andrey, The file is a zip file. Simply change the ".exe" end to ".zip", then you can see all source files. If you use windows explorer to download the file you can get the file with zip. Best...
View ArticleTlv493
Thank you for your reply I had seen this before but the Register and the chip address is not precise as different Registers are used to store X,Y and Z direction values.
View ArticleOpenMP support for Infineon AURIX microcontrollers
Hello all, I would like to try out the parallel programming techniques with Infineon AURIX microcontrollers. Has anybody tested OpenMP or OpenCL with Infineon microcontrollers ?. I know that GNU GCC is...
View ArticleReposting: OpenMP support for Infineon AURIX microcontrollers
Please see my below post. https://www.infineonforums.com/threa...crocontrollers Regards, Deepu
View ArticleHow to know the state(ideal/Busy) of other cores(core1/2) from the master...
What do you mean by busy ? Can you please elaborate ?
View ArticleTIM0 or CCU6 on TC23x for PWM acquisition
It is better to go with GTM. Because it is much advanced and easy to scale up for future needs.
View ArticleHow to build multicore environment by using Hightec compiler on tc275 series?
Hi, what you do you meant by multi-core environment ? do you mean OpenMP or OpenCL support ?.
View ArticleXMC4500 stepping AB Flexible CRC Engine BUG?
Yes, this problem was not seen in earlier products because a wait state was always inserted. For XMC this needs to be done by software. We have documented this issue in the Errata Sheets.
View ArticleEthercat firmware update on XMC4800
Given the ample amount of flash space on an XMC4800 and the fact that I plan setting these devices up in a system with Ethercat as the only channel of communication with a host, it would be nice to be...
View ArticleClik here to view.
Timer application for TC275B controller
Quote: Originally Posted by jegan Dear Mr.Piet Glas, Thank you for your reply. I tried with the following sample program mentioned in that link. #include <time.h> #include <clock.h>...
View ArticleSPI - MOSI and MISO Pins are connected - How to set up read command? FIFO
Dear Community, On my XMC4800 I have 1 Pin for MISO (4.6) and one Pin for MOSI (3.11). These to lines are connected, because my Slave only has 1 Single Data Line. I am using a FIFO for data buffering....
View ArticleAutomated Code Generation and Build of a DAVE project
Hi, Is there an update on that request? We would like to do the same and build a DAVE project outside of the IDE for continuous integration purpose. Is this a feature that could appear in a next...
View ArticleXMC2Go and a Button
Hi all, Trying to get a XMC2Go and a pushbutton to work together to control an LED, am a bit lost though. Anyone have any examples they can point me to ?
View ArticleXMC 4500 - how to enter Hibernate mode?
Hi, I am using the Relax Kit with XMC4500 and I need to enter Hibernate mode and wake up on RTC events. I tried to implement the activation of this mode as described into the User Manual but it doesn't...
View ArticleUsing the RGB LED Lighting Shield to drive constant voltage LEDs
The RGB LED Lighting Shield was intended to drive consistent current LEDs.
View ArticleClik here to view.
Migration from XMC4500 to XMC4700
Hello Jesus Thanks for your answer. As you requested I attached a PDF with another detailed problem description and a zip File with a minimal program. As far as I remember we checked for DMA Errors and...
View Articlej-link XC800
I' looking seriously for a low price JTAG connector. My target is in the XC800 family. I'd like the Segger j-link EDU but it seems only to be suited for ARM devices. Is there a way or "trick" to make...
View Article