TLV493D-A1B6 detect both 3D joystick position and angle rotation at a same...
Hello, I would like to ask if TLV493D-A1B6 is able to detect both 3D joystick position and angle rotation at a same application with only one chip? More specific, one joystick is placed above the...
View Articlecheapest controller for automotive can
Hi I am supposed to develop a "simple" automotive project drive some interior car lights controlled by CAN. Which IFX controller is best suited for this? (Cheapest) Does IFX has a automotive certified...
View ArticleDifference between Junciton, Storage and lead Temperature
Junction temperature: The maximum temperature of the junction (silicon) inside the package is 150 °C. For safe device operation, the allowable maximum TJ must never be exceeded. Storage temperature:...
View ArticleOn-resistance of a power MOSFET
Hi, I googled a lot but still can´t find. So I ask in this way. How can I calculate the on-resistance of a power MOSFET? Thank you in advance.
View ArticleIR25750 current sensing
How can IR25750 be used to sense the current in a low-side and a high side MOSFET?
View ArticleUpgrading GCC in DAVE4
Hi, ARM released 6-2017-q1-update, https://developer.arm.com/open-sourc...u-rm/downloads Regards, Jesus
View ArticleClik here to view.
Upgrading SEGGER JLink in DAVE4
Hi, Segger is releasing new versions of their JLink debug software quite often, and it is always a good idea to keep up with the latest fixes. You can download the latest version of the JLink software...
View ArticleUmlaute are accepted in usernames for the forum, but not in the ticket system
Hi, it seems that umlaute are accepted in usernames for the forum, but not in the ticket system. Or is there another reason i'm not able to log in. Kind regards, Johannes
View Articledesign.infineon.com
For example 'XMC1300 LED Current Controller Explorer - Example A3' uses CCU8 .
View Articlerugged or fast body diode
Most resonant circuits are half- or full-bridge topologies (2 or 4 transistors). As transistors are switched on and off, energy can be left in the transistor and this can cause failure. Due to...
View ArticleDifference between SMD pad and NSMD Pad
“Solder mask defined” (SMD) pad : The copper metal pad is larger than the solder mask opening above this pad. Thus the pad area is defined by the opening in the solder mask. Non-Solder Mask Defined”...
View ArticleStorage temparature for Power MOSFET Bare Die
Hi there, I bought MOSFET Bare Die and want to know some details about MOSFET Bare Die. What is the storage temparature for Power MOSFET Bare Die? Thanks
View ArticleHow to setup a development environment for XMC microcontrollers
This guide is an overshoot. For me, I just downloaded the Dave, learn the examples and start to code.
View ArticleXmc4800 - ieee1588
I have the same issue here. After using the XMC_ETH_MAC_InitPTP() function, I read back the value of TIMESTAMP_CONTROL register and it is 0x6401 (ie: TIMESTAMP enabled, PTPv2, UDP packets, snapshots...
View ArticleXMC4800 EtherCAT high speed sync event
Hello, I am using xmc4800 chip for bldc etherrcat driver. The DC sync0 is enable in this project. When I control the slave with dc sync0 enable by ethercat master, it works only if the sync0 cycle time...
View ArticleC167CR-LM GPT1 Core Timer T3 How does it work?
Thanks alot for your answer! What Number would then stand in the Register T3 every tick? It is the resolution at that in your case it is at 12.8us Are these then accumulated? Otherwise It would not...
View ArticleSPI & Shift Clock XMC1200
Hi, I'm afraid not. The problem is, if understood the correctly the MY9291, that DI is a double data rate signal. I found a bit-bang implementation at...
View Article