How to set ADC XMC1300
Are you using DAVE3? If yes please migrate to DAVE4. Lastly which Stepping code are you using? AA Step?
View ArticleSDRAM over EBU
Hello, I am trying to get the SDRAM runnig over the EBU interface. But when i'm testing the device i'm loosing most of the data. I am using DAVE v4.1.4 with the XMC library. Is there any example code...
View ArticleLWIP "Generate Code" error
Hi everybody, I've noticed the same issue but only when I try to generate the code for a XMC4800. For XMC4500 the code Generation works. Regards, Niclas
View ArticleHRPWM - HRC Dead time insertion for HR and LR paths
Hi all, After reviewing this section of the reference manual I think I finally understand this idea. In short, high resolution path allows for different clock shifting on rising and falling edges. Due...
View ArticleClik here to view.
Brand New Version does not work
Hi, Can you please follow steps as described in attached image? Best regards Ningareddy Attached Images workaround.png (212.7 KB)
View ArticleDAVE4 - CAP001 missing
HI, Currently the CAPTURE APP is planned for release in July. In the meanwhile, I recommend use the XMCLib to measure the dutycycle of a digital input. For this, you can refer to the Application Note:...
View ArticleApp Selection View Empty
Thank you Daryl for your reply. Yes, I created a CE Project. The fact is that I need to use Dave 3.1 to develope my project. How can I add apps on 3.1 version? Tobe sure I'm following the right...
View ArticleClik here to view.
XMC1100 40Pin QFN - SDW1 issue
If I use the J-LINK part of the XMC1100 bootkit and memory tool I can set the BMI from ASC BSL to Debug(SWD1). I do this using the J-LINK TX/RX pins on the 8way connector. Once in SWD1, I used Dave BMI...
View ArticleClik here to view.
XMC1400 boot kit
Hi~ The XMC1400 boot kit being tested When the contents of the GattingStared document Attachment 2068 Like the picture above Supported Application Cards examples: Colour LED Card,White LED Card Are...
View ArticleClik here to view.
XMC1300 Boot kit - ERU??
Hi~ Attachment 2069 Like the picture above In order to use the event trigger using an external pin I'll use the event_detector & event_generator app in xmc1300 boot kit But the app is only...
View ArticleXMC1302 XMC1000_BmiInstallationReq(0xFFC0)
Hello, I am using XMC1300 boot kit to set BMI. So far so good. I tried using function: XMC1000_BmiInstallationReq(0xFFC0) to change BMI to default ASC mode. Although the BMI changed to ASC mode , I am...
View ArticleClik here to view.
XMC4500 Relax Kit Ethernet Error
Hello everybody, I'm using the XMC4500 Relax Kit and I have the following problem: I'm converting from analog to digital (ADC) and sending (UDP) the value to a client. In this case, the client is a...
View ArticleHRPWM - Is period adjustment possible?
Oh, now I see. That is a good question. But if you set the falling edge by n steps the period value would still be the same no mater what you do, right?
View ArticleTLE9879x - NAC and NAD
Hello, I am working with TLE9879x controller. I need information regarding the startup procedure for TLE9879x controller. I also want to understand what actually NAC and NAD means. It was found that...
View ArticleClik here to view.
Visit our booth at Embedded World 2016!
Visit Infineon at Embedded World in Hall 5, Booth 360 23 - 25 February, Nuremberg Attachment 2076 Expect to see a raft of live demos and exhibit innovations guaranteed to add value to your application...
View ArticleClik here to view.
ADC - data reduction mode - technical question
Quote: Originally Posted by enigmaldc Hi All, Quick simple question. In reduction mode, if you have assigned the output to be stored in a specific register, does this register obtain the average of...
View ArticleXMC4700 Errata Entry USIC Parity Mode
Dear Infineon, by reading the latest errata sheet for the new XMC4700 series, I discovered an entry regarding the USIC parity mode. I know this bug from our old XMC4500 micros. Infineon fixed this bug...
View ArticleXMC1100 - special UART Command to leave User Productive Mode
Hello, I´m trying to send a command (string = LED_ON) with HTerm to switch on/off a LED. Is this possible with the Pin0.14 and Pin0.15 at the XMC1100 Boot Kit ? I´m looking for a solution for changing...
View Articleoutput level on reprogramming - technical question
Hi All, Is there a way to control the levels to which the GPIO output levels are set upon re-programming the uC? If I reprogram the uC, my GPIO levels go high for a few milliseconds before setting to...
View Article