XMC4500 clarification for errata PORTS_CM.001
Hi everybody, the XMC4500 errata-sheet states an errata for Pins 4 and 5 of Port15. The corresponding bits in the PDISC-register cannot be written to 1. For the case of this bit being 0 the reference...
View ArticleBGT24-RFB2412 Board USB Connection
Hello, I've recently purchased the 24Ghz radar development board BGT24-RFB2412 (with the XMC4400-F100k512 AB micro-controller). I'm trying to upload a new firmware from the sample code I got with the...
View ArticleXMC1300 Boot kit - ERU??
Hello, An ERU module supports the generation of 4 interrupts based on input sources (e.g. pins). Can your application use the built-in OR logic to group 2 pins per ERU interrupt? Another alternative...
View ArticleXMC1400 boot kit
Thank you for your help. When do I get the motor sample source of xmc1400?
View ArticleU0C1_SSC_vSetSELO function
Dear all, Hello. I have tried to implement HOT_XE164FM_EEPROM example by my Easy kit_XC2331D-SK and Keil. In Dave, I have activated the U0C1_SSC_vSetSELO function in U0C1 configuration, but it does not...
View Articleoptimization levels - what do they bring
Lots of stuff to read. :) https://gcc.gnu.org/onlinedocs/gcc/O...e-Options.html A safe bet is to use O0 to debug. Even at O1 the debugger seems to behave like an idiot because of the optimization done.
View Articlefast internal clock.
Hi every one, I am working with XMC4500, i have configured the PLL input as Fast internal clock. with Factory calibration at 24mhz but it is not configured means VCO is not locked. please any one can...
View ArticleGPIO tri-state on reset unclear - help please
Hi All, I have added pull-down resistors (10k) on the output of the GPIO pins and still find that when I reprogram the uC that the levels go relatively high. It goes to 3V instead of the typical 5V....
View ArticleClik here to view.
[XMC4500 Relax Kit] SD Card Data Write
Quote: Originally Posted by Travis Hi, The latest DAVE version has got the apps for SDMMC. http://www.infineonforums.com/thread...e-Support-Pack BR Travis I can't find it anywhere. There aren't any...
View ArticleETH_LWIP Documentation
Hi, I'm trying to create a simple TCP socket server using Dave App ETH_LWIP. LwIP is correctly running and I'm able to ping my board. Can you suggest me some documents? I don't undestand which...
View Articleproblem with GLOBRES register (XMC1100)
Hi! I wrote a program to use VADC with 5 input channels. I found a lot of useful information on XMC forum which helped me to start. Here is my first program: Quote: #include <xmc_vadc.h> #include...
View ArticleXMC - BCCU as DAC
Hi All, I would like to use the BCCU to generate a reference level with the help of a low-pass filter. Does anyone have an example project on how to do this? I could not find any documentation on this,...
View ArticleClik here to view.
Get active on XMC, DAVE Forums and Be Rewarded!
Latest update! :) We will announce the 1st Apple Watch winner in May, 2nd win in Q3 2016, and 3rd win (date to be provided later). Attachment 2081 How to win the Apple Watch?Gain User Points (by...
View ArticleClik here to view.
Get active on XMC, DAVE Forums and Be Rewarded!
Latest update! :) We will announce the 1st Apple Watch winner in May, 2nd win in Q3 2016, and 3rd win (date to be provided later). Attachment 2082 How to win the Apple Watch?Gain User Points (by...
View ArticleXMC4000 or XMC1000 Motor Control Application Kit in DAVE4 PWM_BC with POSIF
Hi all, I had try XMC1000 Motor Control Application Kit with DAVE4 BLDC app ,it's work with BLDC motor. But I try to use PWM_BC with POSIF function (It's part of DAVE4 BLDC app) drive the motor, It...
View ArticleClik here to view.
DAVE4 - CAP001 missing
HI, Using the CAP001_Example_XMC13 project, you can add the IO002 APP. This is the input pin for your capture signal. Thereafter you can connect the PAD signal to CAP001/Input Duty and Input/Period....
View ArticleXMC4700 Errata Entry USIC Parity Mode
Hi Michael, Thanks, I found the document and yes, it is still online. I am awaiting confirmation from the relevant colleagues and will post an update once this is in. Regards, Min Wei
View ArticleLWIP "Generate Code" error
Hi Torsten, Yes, you are absolutely right, it is possible to do a "DAVE Project Upgrade -> APPs Upgrade". This can work if the project contains older versions of APP. During the upgrade to the...
View ArticleSD card example for XMC 4500 Relax kit
Hello, where do you found the app? I use Dave 4.2.2 but I can't find the app. Kind regards Kurt
View Article