IGBT in general
Good morning, do you have any general information on IGBTs? Where can I find them? Thanks! Fränce
View Articlehard/soft switching
I have heard about hard and soft switching igbts. What is the difference? What are the pros and cons of either switching method, if there are any? Thanks, Fränce
View ArticleSSC files for XMC4800
Hello, To be honest EtherCAT is not very hobbyist friendly. If you can't get the "free" reference implementation by ETG you have to get one on the free market. Unfortunately this means to all my...
View ArticleDAVE 4.4.2 Problem SPI
Hello, theoretically you can use as much available GPIOs as CS signals as you want. You only need to set them yourself in software instead of handing raising and pulling the signal to the hardware....
View ArticleClik here to view.
Primepack IGBT5 and .XT
Quote: Originally Posted by Fränce One more Question regarding IGBT 5 and XT... Could you please elaborate on the advantages of IGBT5/.XT modules compared to modules with standard joining technology?...
View ArticleSwitching capability
Dear all, Does the IGBT have unclamped inductive switching capability? Thank you in advance!
View ArticleBLDC Sensorless FOC (TLE9879 Kit) - Not able to acheive higher speed
Hi Harsha, I have meet the same problem like you. Do the problem solved now and how? Best, Hongwen
View ArticleOPCUASERVER_LWIP_XMC47 on xmc4800 automation board
Hi, my configuration is the same you've suggested, but the server doesn't start. I'm running the code in the XMC4800 automation board v2 and not in the relax kit. Could they be so different from each...
View ArticleInfineon Distance2Go-module (XMC4200-256) questions
Hi All, I have recently, received a 24 GHz Distance2Go device. I have already installed the app. and it works properly. But the problem is It records the data in .bin files while regarding its...
View ArticleHow to get the max speed of motor
Hello Fiz, When I using Foc program,the motor cant reach the reference speed. And I use your advice that increasing the pairs,but is useless. Please tell me how to solve the program. I am hoping your...
View ArticleBLDC_HALL Problem
Dear Infineon Team, I got a little Problem running a BLDC with the Shield for Arduino. According to the User Manual i removed R36, R37, R38 and soldered R18, R19, R20, R21, R22, R23, R25, R26, R27...
View ArticleRun-time detection of Debugger Hot Attach or Debugger Active
Hello Support, Please provide OCDS register bit fields which will positively identify that Debugger is either Hot Attached or Debugger is Active in Aurix 2G devices during run-time, which the running...
View ArticleClik here to view.
ASCLIN on TC234 ADAS problems
Quote: Originally Posted by cwunder Hi Toshi, I don't doubt your experience or skill. I just wish to make the statements below to help clarification. I personally don't share the same view that MTCR...
View ArticleDetails on using a pin as an external interrupt source on XMC1302
Reference : DIGITAL_IO HW Signal Connection Issues Is there an example app or detailed information of using an input as a interrupt source via ERU? This is on a XMC1302. Also, what is the interrupt...
View ArticleNumber of Bytes received over UART when using DMA
Hi, Im using the UART App in DAVE to receive bytes asynchronously. I dont know how many bytes I will receive ahead of time, but I do know that they will come in periodic bursts. I configured the UART...
View ArticleImpossible to set BMI
I have a problem in setting the BMI. I have built quite a few boards before, set BMI in the same way and I did not have any problem. Recently another set of boards are built and I need to program them...
View ArticleClik here to view.
Dave MultiCan_Config LMO3 problem
Hi. I've got a problem with lmo3 in multican_config. When I allocated MO's at HW Signal connectivity scheme event_lmo_03_rxinp disappeared. Attachment 4523 At HW Signal connectivity table: Attachment...
View ArticleUART drop 1 bytes when recovery from WFE
Hello, I have a problem when enable WFE while enable UART receive interrupt. For WFE, I set the function to XMC_SCU_CLOCK_SetSleepConfig(XMC_SCU_CLOCK_SLEEP_M ODE_CONFIG_ENABLE_CCU); For UART, I set...
View ArticleHigh Speed Debug/Communication for AURIX
Hello, What would be the options for High Speed Debugging and Communication for the AURIX controllers? I am refering to an application that needs a very fast feedback loop where the SW can't be stopped...
View Article