UART idle state for TC277
For UART, a frame is absolutely one start/data/parity/stop bit sequence.
View ArticleSampleCode for TC37x
Thank you. I understand that it is unsupported. I'm sorry for the additional questions. There are evaluation boards such as "KIT_A2G_TC3**" on the market. Isn't there sample code available for...
View ArticleTricore disassembler - instruction decode manual?
Please see the TriCore Architecture Manual Part 2 which contain the complete instruction set with all needed information. A special decode manual (e.g. "How to write dissassembler…") don't exist.
View ArticleIMC101T Low Speed Performance
Thanks for the suggestion. The tuning guide wasnt that useful as it seems to be mostly focused on single shunt arrangements, but it did point me in the right direction. I increased the shunt...
View ArticleDefault value for GPIO unprogrammed
Hello For TC38x 32-Bit Single-Chip Microcontroller : I would like to know the dafault state for GPIOs, during and after reset, in documentation I found this: "The default state of GPIOs (Px.y) during...
View ArticleGtm_tom
Hello I am a new member, now i have project about make PWM with Pulse from 10ns to 999us and frequency from 1hz to 10khz I was follow your example code and work base on direction. But i could not get...
View ArticleClik here to view.
Emulated eeprom for XMC1300 Example exception in debugg mode
Hi, I'm trying to debugging the example E_Eeprom_xmc1_example_xmc1300 without success. When I start the debugger, I get an exception to the default handler ( b .) and I dont know why. What I'm doing...
View ArticleWhat is BIFACES and how to use it?
Hi, I am struggling to configure tasking v6.2r2p4 license for BIFACES. I adapted Config.xml to select tasking toolset and given tasking binary path in Config_Tasking.mk Still i am getting below error :...
View ArticleXMC Debug LED blinking
Have you solved your problem? I have the same issue with XMC4200 kit
View ArticleDPS422 reference value for raw temperature and pressure measurement
Hi Iudw I assume the reason your not getting any help is because calculation of the pressure depends on the settings you've made too. If you check the datasheet on page 16 (5.1.1) you see, that you...
View ArticleDMA can't copy code to PSPR memory location in which existed already code
Hello, i'm using TC275, i'm using DMA to copy code from PFlash0 to PSPR. i noticed that DMA was not able to overwrite a memory region in which exists already some code. is it normal or i need to do...
View ArticlePWM Generation using GTM TOM PWM Driver
Hi @delattre2 I also put function IfxGtm_Tom_Pwm_start(&tomHandle, TRUE); but i have got a miss is ` undefined reference to IfxGtm_Tom_Pwm_start` although i have library "IfxGtm_Tom_Pwm.h" i don`t...
View ArticleGaN HEMT - IGOT60R070D1 NC pad connection
It'll be extremely helpful and useful of you guys if you give a timely reply. Replying after 2 months doesn't even make sense and I don't think you really have to be in your office to reply
View Articleminiwiggler PORST problem
Great! Thank you for the reply. I got the same problem encountered. Good thing I stumble in here. Now I can continue playing battle cats LOL Thanks again brother!
View ArticleClik here to view.
FAQ for miscellaneous Embedded Power IC Topics
The Demag filter is an Asynchronous State Machine, which behavior follows the following state diagram: Attachment 4953 ????? demagFilter.png (26.2 KB)
View ArticleMy Xmc1400 is keep reseting
Hello, I've done the dummiest thing and add a XMC_SCU_RESET_AssertMasterReset() line at the beginning of my code. Now it keep resetting of course and I cannot connect to it with neither Dave other...
View ArticleTracking in Position2GO using MATLAB
Thanks for share this. I also use the Matlab assignment service. They help me with my homework.
View ArticleClik here to view.
Aurix 1G SMU3[27] Safety Flip-Flop Alarm type
Hello Support, In Aurix 1G TC297 device, SMU3[27] Alarm is an Uncorrectable Error of Correctable Error? Also, what does it indicate? How to know which register is erroneous? Is it Transient Single...
View Article