XMC4800 FIFO SPI transmission problem (DAVE API)
Adding the bold lines to my send functions did the trick! Could anyone explain to me, why this is necessary (as I am using out of the box DAVE Code !?) __STATIC_INLINE void...
View ArticleCopter.rocks - LARIX_Software_150907 - Usable PID values?
As no one seems interested in our problem ;) and we still could not figure out which values work, we decided to try programming our own controller. Starting with a simple rate, then adding an angle...
View ArticleXMC4400-F64K512 AB use pin RTC_XTAL1 input to generate interrupt using ERU0.1B1
Still waiting for an answer on this. If I could get a confirmation that this is not possible, then I would have to use another pin.
View ArticleGit Icon Decorations in Git 4
Hi, sorry if this question has been asked before, but the forum software won't let me search for terms like "Git" or "Team" because they are "too short or too common". I'm using Dave 4 and I'm using...
View ArticleJ-Link update fail
It is just power Isolated issue. When I provide the 5V power from inverter board, the problem is fixed.
View ArticleClik here to view.
Port control in SPI half duplex mode - Seeing dummy bytes on MOSI/MISO channel
Hello everybody, when I use the out of the box DAVE SPI Half Duplex Mode (Output = OpenDrain with external PullUp, FIFO RxSize=TxSize=32, I use Pin 4.7 as MISO/MOSI Line (as recommended by DAVE) on...
View ArticleVAGND Pin [XMC4500 Relax Kit Lite]
Hello all, I have a quick questions, what Pin is the signal VAGND assigned to? Or is that connected to GND? Cheers, Ahmed
View ArticlePort control in half duplex mode - Seeing dummy bytes (oscillosocope) on...
Above is my thread in the DAVE Section, I am not quite sure where to put it. https://www.infineonforums.com/threa...I-MISO-channel
View ArticleMaximum ratings [XMC4500 Relax Kit Lite]
Hello, I can not find the maximum ratings for the XMC4500 Relax Kit Lite neither in the manuual for the Rleax Kit Lite nor in the documentation of the XMC4500. What are they? EDIT: Found them.
View ArticleCopter Simulator
Hi Philipp, I´ve seen your status-update at the last Tele-Hase Event a few weeks ago. In the Video I´ve seen one of you using the Spectrum DX6i to control your Simulator. I´d like to ask one question:...
View ArticleClik here to view.
[XMC4800] switch pin between GPIO and UART
Hi I am trying to generate some kind of signal on a particular pin. Part of that signal should be generated by ordinary GPIO actions and part of that signal should also be generated by UART. In fact, I...
View ArticleLwip 2.0.0
Did anybody tried email? It was working very well. But I suddenly when I came back to the last project. It nearly stopped working. Only 2 emails out of thousands of tests. The SMTP protocol seems to...
View ArticleFAQ for XMC4800 EtherCAT
Last week I've received my XMC4800 Relax eval board from DigiKey. I also downloaded and installed DAVE 4.2.6. When I build the ETHCAT_SSC_XMC48 example project I encountered compilation errors due to...
View ArticleMaximum Ethernet Speed with XMCLib and XMC4800 on Relax Kit v1 on 100 Mbit/s...
About bus debugging. "Measured via PC on Windows with Wireshark with an Intel Pro 1 GBit/s NIC." I am using a laptop that is physically connected to the router via WLAN. The MCU is connected to the...
View ArticleXMC4500 - Power through board
Hello! I have a doubt, and was wondering if you could help me. I designed a PCB where I place my XMC4500 board. I program the board and then I place it on the PCB, that feeds power to the XMC and...
View ArticleNewbie with the usual questions.
Thanks srhim1971. That's explains much of what I wanted to know. One more question if you don't mind my curiosity; so a manufacturer of, let's say, a servo drive would have the units all build and...
View ArticleDevelopment for different microcontrollers
Hi, is there a practical way to develop a project for use with different microcontrollers? For example I am writing a bootloader that I want to use on different controllers of the XMC 4000 series. But...
View Article